Electrical and Electronic Engineering Technologists and Technicians

Cw Beacon

Control the CW (Morse code) beacon on the Raspberry Pi test instrument. Uses GPCLK hardware clock generator on GPIO 5/6 to produce a square-wave RF carrier in the 80m band (~3.5-4.0 MHz), keyed with Morse code at configurable WPM. Use for direction finder testing, RF beacon generation, or Morse transmission. Triggers on "CW beacon", "Morse beacon", "direction finder", "80m signal", "GPCLK", "RF carrier".

SensorsIot127

The Bench Toolkit

Bench instruments and measurement techniques for electronics — digital multimeter, oscilloscope, logic analyzer, spectrum analyzer, function generator, power supply, and their proper use. Covers probing technique, ground loops, loading effects, trigger modes, FFT mode pitfalls, signal integrity, noise budget analysis, and debugging workflows from "it doesn't work" to "here is the failure mechanism." Use when measuring, debugging, or characterizing any electronic circuit or firmware-hardware interaction.

Tibsfox51

監控

Gps Msg Add

Add a group of related GPS configuration messages to a TOML message file

監控

Satpulsetool

How to use satpulsetool - GPS receiver configuration and packet decoding tool

天文同物理

Gps Msg Test

Test GPS messages from a TOML file using satpulsetool

生產力同整合

Gps Msg File

Create GPS message TOML files for configuring GPS receivers via satpulsetool

Look

Focus your eyes on something specific. Ask about what you see — people, objects, colors, anything in front of you.

OriNachum14

架構模式

Embedded Systems

Patterns for embedded software development including real-time systems, memory management, hardware abstraction, interrupt handling, and debugging techniques for resource-constrained environments. Use when ", " mentioned.

Supraforge14

科學計算

Syn Tool Profiles

Passive synthesis tool profiles (yosys, dc_shell, genus) for replayable runs and comparable summary outputs.

babyworm12

Dcs Platforms

Reference for major DCS/PLC platforms - ABB Freelance, Siemens PCS7/TIA Portal, Emerson DeltaV, Honeywell Experion. Use when comparing platforms, mapping function blocks across vendors, or designing cross-platform solutions.

claude-dev-suite11

Isa Standards

ISA-5.1 tag naming, ISA-88 batch control, ISA-95 enterprise integration, ISA-18.2 alarm management, and ISA-101 HMI standards reference. Use when working with instrument tags, naming conventions, or plant hierarchy.

claude-dev-suite11

系統管理

Ethercat Setup

Establish EtherCAT communication between Jetson and EtherCAT slave devices using the EtherLab EtherCAT Master driver. Covers driver installation, configuration, slave scanning, and motor control example (MyActuator X4). Requires JetPack 6.2 (L4T 36.4.3).

Seeed-Projects9

系統管理

Monitor

Start serial monitor for MCU device

laurigates4

Chipone

Chipone Technology MPN encoding patterns, suffix decoding, and handler guidance. Use when working with Chipone LED driver components or ChiponeHandler.

Harting

Harting industrial connector MPN encoding patterns, series decoding, and handler guidance. Use when working with Harting Han, M12, M8, har-bus, or har-flex connectors.

Lelon

Lelon Electronics MPN encoding patterns, suffix decoding, and handler guidance. Use when working with Lelon aluminum electrolytic capacitors.

Chilisin

Chilisin Electronics inductor MPN encoding patterns, value decoding, and handler guidance. Use when working with Chilisin inductors or ChilisinHandler.

Logicic

Use when working with 74xx and CD4xxx series logic ICs - standard TTL/CMOS logic gates, flip-flops, counters, decoders, multiplexers. Includes technology families (LS, HC, HCT, AC, AHC) and LogicICHandler guidance.

測試

Eda Drc

Design validation and review. Run DRC/ERC checks, verify against constraints, check component availability, and prepare comprehensive validation reports.

Eda Research

Component research and procurement. Search JLC for components, analyze datasheets, compare options, and document selections with rationale.

機器學習

Coilcraft

Coilcraft MPN encoding patterns, inductance value decoding, and handler guidance. Use when working with Coilcraft inductors, transformers, or RF components.

Epson

Epson timing devices MPN encoding patterns, suffix decoding, and handler guidance. Use when working with Epson crystals, oscillators, RTCs, or EpsonHandler.