Insektenpopulation erfassen

Vorgehensweise

Schritt 1: Entwerfen the Survey

Definieren what you want to learn, where you will sample, and how much effort you will invest. Survey design determines the statistical power and ecological validity of everything that follows.

Survey Design Framework:
+--------------------+------------------------------------------+
| Component          | Define Before Fieldwork                  |
+--------------------+------------------------------------------+
| Objectives         | What ecological question does this       |
|                    | survey answer? Examples:                 |
|                    | - "What is the species richness of       |
|                    |   ground beetles at Site A?"             |
|                    | - "How does pollinator diversity differ   |
|                    |   between restored and unrestored        |
|                    |   meadows?"                              |
|                    | - "Has moth diversity changed since the   |
|                    |   2020 baseline survey?"                 |
+--------------------+------------------------------------------+
| Target taxa        | All insects? A specific order (e.g.,     |
|                    | Coleoptera)? A functional group (e.g.,   |
|                    | pollinators)? Narrower focus = more      |
|                    | reliable identification and analysis.    |
+--------------------+------------------------------------------+
| Study site(s)      | Geographic boundaries of the survey      |
|                    | area. Map the site. Identify distinct    |
|                    | habitat types within the site.           |
+--------------------+------------------------------------------+
| Sampling design    | Random, stratified random, or systematic |
|                    | placement of sampling points/transects.  |
|                    | Stratify by habitat type if the site     |
|                    | is heterogeneous.                        |
+--------------------+------------------------------------------+
| Replication        | Minimum 3 replicates per habitat type    |
|                    | or treatment. More replicates increase   |
|                    | statistical power but require more       |
|                    | effort. For species accumulation curves  |
|                    | to stabilize, 5-10 replicates per       |
|                    | habitat are often needed.                |
+--------------------+------------------------------------------+
| Temporal scope     | Single survey (snapshot) or repeated     |
|                    | surveys (monitoring)? If monitoring,     |
|                    | define frequency (monthly, seasonal,     |
|                    | annual). Match frequency to the          |
|                    | phenology of target taxa.                |
+--------------------+------------------------------------------+
| Effort             | Define standardized effort per sample:   |
|                    | "20 sweep net sweeps per transect" or    |
|                    | "pitfall traps open for 72 hours" or     |
|                    | "light trap operated 20:00-02:00."       |
|                    | Consistent effort across samples is      |
|                    | essential for comparison.                |
+--------------------+------------------------------------------+

Erwartet: A written survey protocol specifying objectives, target taxa, site description, sampling design (random/stratified/systematic), number of replicates, temporal scope, and standardized effort per sample.

Bei Fehler: If the survey objectives are vague ("see what insects are here"), refine them into a testable question vor proceeding. A survey ohne clear objectives cannot be ordnungsgemaess designed, and das Ergebnising data may not answer any question well. If site access is restricted, modify the design to work innerhalb constraints anstatt reducing replication unter 3 per comparison group.

Schritt 2: Waehlen Sampling Methods

Auswaehlen methods appropriate to das Ziel taxa, habitat, and survey objectives. Different methods have different capture biases.

Method Selection by Target Taxa:
+--------------------+------------------------------------------+
| Target             | Recommended Methods                      |
+--------------------+------------------------------------------+
| Ground-dwelling    | Pitfall traps (primary), hand collection |
| insects (Carabidae,| under rocks/logs, bark traps, Berlese    |
| Staphylinidae,     | funnels for soil fauna                   |
| ants, crickets)    |                                          |
+--------------------+------------------------------------------+
| Vegetation-        | Sweep netting (primary), beating trays,  |
| dwelling insects   | vacuum sampling (D-vac or G-vac),        |
| (Hemiptera,        | branch clipping for canopy               |
| Chrysomelidae,     |                                          |
| Orthoptera)        |                                          |
+--------------------+------------------------------------------+
| Flying insects     | Malaise traps (Diptera, Hymenoptera),    |
| (general)          | flight intercept traps, window traps     |
+--------------------+------------------------------------------+
| Pollinators        | Pan traps (yellow, white, blue bowls),   |
| (bees, hoverflies) | transect counts (visual observation),    |
|                    | sweep netting on floral resources        |
+--------------------+------------------------------------------+
| Nocturnal flying   | Light traps (mercury vapor or UV),       |
| insects (moths,    | sugar baiting (for moths), light sheets  |
| many beetles)      |                                          |
+--------------------+------------------------------------------+
| Aquatic insects    | Kick-net sampling (streams), D-frame     |
| (Ephemeroptera,    | net sampling, Surber sampler             |
| Plecoptera,        | (quantitative), artificial substrates    |
| Trichoptera)       |                                          |
+--------------------+------------------------------------------+
| Butterflies        | Pollard walk transect counts (standard   |
|                    | visual survey method for butterflies),   |
|                    | timed counts per habitat patch           |
+--------------------+------------------------------------------+

Standardization Rules:
- Use the same method, equipment, and effort at every sample point
- Record start and end times for every sampling event
- If using traps, record deployment and retrieval times exactly
- Weather-dependent methods (sweep netting, transect walks) should
  only run under acceptable conditions (no heavy rain, temperature
  above activity threshold for target taxa)

Erwartet: One or more sampling methods selected and justified for das Ziel taxa, with effort standardized across all replicates and sample points.

Bei Fehler: If a single method produces too few specimens for meaningful analysis, consider adding a complementary method. However, data from different methods sollte analyzed separately — nicht pool pitfall trap data with sweep net data in the same diversity analysis, as they sample different portions of the community with different capture probabilities.

Schritt 3: Ausfuehren Fieldwork

Bereitstellen sampling equipment, conduct collections, and record all metadata needed for analysis.

Field Execution Checklist:

Before each sampling event:
- [ ] Record date, time, GPS coordinates of sample point
- [ ] Record environmental covariates (temperature, humidity, wind,
      cloud cover) — see observe-insect-behavior for details
- [ ] Verify equipment is clean and functional
- [ ] Label collection containers with site, date, replicate number

During sampling:
- [ ] Follow the standardized effort exactly (same number of sweeps,
      same trap duration, same transect length)
- [ ] Keep specimens from each sample point in separate, labeled
      containers — never mix samples
- [ ] Record any deviations from protocol (e.g., "trap knocked over
      by animal, collected after 48h instead of 72h")
- [ ] Note any unusual observations (mass emergence, swarming events,
      absence of expected taxa)

After each sampling event:
- [ ] Verify all containers are labeled
- [ ] Record end time and any changes in weather during sampling
- [ ] Preserve specimens promptly (kill jar or ethanol) — do not leave
      live specimens in collection bags for extended periods
- [ ] Store preserved specimens in a cool location until processing

Erwartet: All planned samples collected with standardized effort, each sample in a separately labeled container, with full metadata recorded for every sampling event.

Bei Fehler: If a sample is compromised (trap disturbed, heavy rain waehrend sweep netting), record das Problem and either discard the sample or note it as a potential outlier. It is better to have one fewer replicate than to include compromised data. If weather prevents sampling on a planned date, reschedule to the nearest suitable day — nicht attempt to sample under inappropriate conditions.

Schritt 4: Identifizieren Specimens

Sortieren and identify all collected specimens to the lowest practical taxonomic level. This is typischerweise the most time-consuming step.

Identification Workflow:

1. SORT to order — separate beetles from flies from wasps etc.
   Use the dichotomous key in the identify-insect skill.

2. SORT to morphospecies within each order — group visually
   identical specimens together. Assign a temporary code
   (e.g., "Coleoptera sp. 01", "Diptera sp. 14").

3. IDENTIFY morphospecies to the lowest level achievable:
   - Family (achievable for most insects with general keys)
   - Genus (achievable for well-studied groups with regional keys)
   - Species (achievable for well-known groups; may require
     specialist confirmation for others)

4. VERIFY identifications by:
   - Cross-checking multiple specimens of each morphospecies
   - Comparing against reference collections
   - Sending representative specimens to taxonomic specialists
     for difficult groups

5. RECORD in a species-by-sample matrix:
   Rows = species (or morphospecies)
   Columns = sample points
   Cells = abundance (count of individuals)

   Example:
                   Site A    Site A    Site B    Site B
                   Rep 1     Rep 2     Rep 1     Rep 2
   Carabidae sp.01    12        8        3         5
   Carabidae sp.02     0        1        7         9
   Staphyl. sp.01      3        4        2         1
   ...

Taxonomic Resolution:
- For diversity comparisons, all specimens must be identified to
  the SAME taxonomic level. Do not mix species-level IDs with
  order-level IDs in the same analysis.
- Morphospecies sorting is acceptable and widely used in ecological
  surveys, especially in tropical regions or poorly known taxa.
- Keep voucher specimens for every morphospecies (see
  collect-preserve-specimens) so identifications can be verified later.

Erwartet: All specimens sorted and identified to mindestens morphospecies level, recorded in a species-by-sample abundance matrix, with voucher specimens preserved fuer jede morphospecies.

Bei Fehler: If certain groups cannot be identified even to morphospecies (e.g., very small Diptera that all look alike), record them as an aggregate taxon (e.g., "Diptera spp. unsorted") and note the limitation. Ausschliessen poorly resolved groups from diversity analyses anstatt introducing uncertain identifications. If identification stalls, send specimens to specialists — this is normal and expected for professional surveys.

Schritt 5: Berechnen Diversity Indices

Konvertieren the species-by-sample abundance matrix into quantitative diversity measures.

Diversity Metrics:

1. SPECIES RICHNESS (S)
   The simplest measure: count of distinct species (or morphospecies)
   in a sample.
   Example: 23 morphospecies in Site A pitfall traps.

2. SHANNON-WIENER DIVERSITY INDEX (H')
   Accounts for both richness and evenness.

   H' = - SUM( pi * ln(pi) )

   where pi = proportion of total individuals belonging to species i
   (pi = ni / N, where ni = count of species i, N = total individuals)

   Interpretation:
   - Typical range: 1.5 to 3.5 for most ecological communities
   - Higher values = more diverse (more species, more evenly distributed)
   - H' = 0 when only one species is present
   - Maximum H' = ln(S) when all species are equally abundant

3. SIMPSON DIVERSITY INDEX (1 - D)
   Probability that two randomly chosen individuals belong to different
   species.

   D = SUM( pi^2 )
   Simpson diversity = 1 - D

   Interpretation:
   - Range: 0 to 1
   - Higher values = more diverse
   - Less sensitive to rare species than Shannon; dominated by
     common species
   - 1 - D = 0.9 means a 90% chance two random individuals are
     different species

4. EVENNESS (J')
   How equally individuals are distributed among species.

   J' = H' / ln(S)

   Interpretation:
   - Range: 0 to 1
   - J' = 1 means all species equally abundant
   - J' close to 0 means one or few species dominate

5. RAREFACTION
   Compares richness between samples with different total abundances
   by estimating how many species would be found if all samples had
   the same number of individuals.
   - Essential when sample sizes differ (they almost always do)
   - Plot rarefaction curves: species vs. individuals sampled
   - If the curve plateaus, sampling has captured most species
   - If the curve is still rising steeply, more sampling is needed

Erwartet: Species richness, Shannon-Wiener index, Simpson index, and evenness calculated fuer jede sample and each site/treatment. Rarefaction curves plotted to assess sampling completeness.

Bei Fehler: If sample sizes are too small for reliable diversity calculation (fewer than 30 individuals per sample), report raw species counts and abundances anstatt computed indices. Small samples produce unreliable index values with large confidence intervals. Note the small sample size as a limitation and recommend increased sampling effort for future surveys.

Schritt 6: Conduct Statistical Analysis

Vergleichen diversity across sites, treatments, or time periods using appropriate statistical methods.

Analysis Approaches:

1. COMPARING TWO OR MORE SITES/TREATMENTS:
   - Shannon H' values: use Hutcheson's t-test for pairwise comparison
     of Shannon indices, which accounts for differences in sample size
   - Species richness: use rarefied richness for fair comparison
   - Abundance data: use Mann-Whitney U test (2 groups) or
     Kruskal-Wallis test (3+ groups) for non-normal count data

2. MULTIVARIATE COMMUNITY ANALYSIS:
   When comparing entire community composition (not just summary indices):
   - Bray-Curtis dissimilarity matrix: quantifies compositional
     difference between every pair of samples
   - NMDS (Non-metric Multidimensional Scaling): ordination that
     visualizes community similarity in 2D — samples close together
     have similar communities
   - PCoA (Principal Coordinates Analysis): alternative ordination
     based on distance matrices
   - PERMANOVA (permutational ANOVA): tests whether community
     composition differs significantly between groups
   - SIMPER: identifies which species contribute most to differences
     between groups

3. TEMPORAL TRENDS (monitoring data):
   - Plot species richness and diversity indices over time
   - Use linear regression or generalized linear models to test
     for trends
   - Account for seasonal variation by comparing same-season samples
     across years

4. SPECIES ACCUMULATION CURVES:
   - Plot cumulative species against cumulative samples
   - Use Chao1 or Chao2 estimators to predict total species richness
     (including undetected species)
   - If observed richness is far below the Chao estimate, more
     sampling is needed

Minimum Reporting:
- Sample sizes (number of individuals and number of samples)
- Diversity indices with confidence intervals or standard errors
- Statistical test used, test statistic, degrees of freedom, p-value
- Effect sizes where applicable

Erwartet: Statistical comparisons completed with appropriate tests, results reported with test statistics and p-values, and ecological interpretation provided.

Bei Fehler: If replication is insufficient for formal statistical testing (fewer than 3 replicates per group), report descriptive statistics (means, ranges) and rarefaction curves ohne hypothesis tests. Bestaetigen the limitation and recommend increased replication for future surveys. Descriptive data from a well-executed survey is more valuable than p-values from an underpowered design.

Schritt 7: Report Results

Compile the survey into a structured report that can inform management decisions, support publication, or serve as a baseline for future monitoring.

Survey Report Structure:

1. SUMMARY
   - Survey objectives
   - Key findings (total species, dominant taxa, notable records)
   - Primary conclusion (1-2 sentences)

2. METHODS
   - Study site description (location, habitat, area, map)
   - Sampling design and methods
   - Sampling effort (number of samples, trap-nights, transect length)
   - Identification methods and taxonomic resolution
   - Statistical methods
   - Survey dates and environmental conditions

3. RESULTS
   - Total specimens collected and identified
   - Species list with abundances per site/treatment
   - Diversity indices table (S, H', 1-D, J' per site/treatment)
   - Rarefaction curves
   - Statistical comparison results
   - Ordination plots (if multivariate analysis performed)
   - Notable records (rare species, new records, invasive species)

4. DISCUSSION
   - How do results compare to previous surveys or nearby sites?
   - What ecological factors explain observed patterns?
   - What are the conservation implications?
   - What are the limitations of this survey?

5. RECOMMENDATIONS
   - Management actions (if applicable)
   - Future monitoring schedule
   - Suggested improvements to survey design

6. APPENDICES
   - Full species list with abundances
   - Raw data (species-by-sample matrix)
   - Environmental covariate data
   - Voucher specimen catalog numbers and repository
   - Photographs of notable specimens or habitats

Data Archiving:
- Deposit raw data in an appropriate repository (Dryad, Zenodo, GBIF)
- Deposit voucher specimens in a recognized museum collection
- Archive the survey report with the managing agency or institution

Erwartet: A complete survey report with methods, results (einschliesslich species list, diversity indices, statistical tests), discussion, and recommendations. Raw data archived in a repository.

Bei Fehler: If the survey is incomplete (e.g., not all specimens identified, insufficient replicates for statistics), produce a preliminary report with what ist verfuegbar and clearly label it as preliminary. Identifizieren the gaps and the timeline for completing them. A preliminary report with honest limitations is more useful than no report at all.

Validierung

• Survey objectives were defined vor fieldwork began
• Sampling design included replication (minimum 3 per comparison group)
• Sampling effort was standardized across all samples
• Each sample was kept separate and labeled with full metadata
• Environmental covariates were recorded for every sampling event
• Specimens were identified to a consistent taxonomic level with vouchers preserved
• Species-by-sample abundance matrix was constructed
• Diversity indices (Shannon, Simpson, richness, evenness) were calculated
• Rarefaction curves were plotted to assess sampling completeness
• Statistical comparisons used appropriate tests with reported test statistics
• Results were compiled into a structured report with species list and recommendations

Haeufige Stolperfallen

• No standardization of effort: Comparing a 10-sweep sample to a 50-sweep sample confounds effort with diversity. Every sample must receive the same effort — same number of sweeps, same trap duration, same transect length
• Pooling data from different methods: Pitfall traps and sweep nets sample different insect communities. Analyzing pooled data produces a number that nicht represent either community accurately. Analysieren each method's data separately
• Too few replicates: A single sample per site provides no estimate of innerhalb-site variability and no basis for statistical comparison. Minimum 3 replicates per comparison group; 5-10 is better
• Inconsistent taxonomy: Identifying some specimens to species and others to order in the same analysis inflates apparent richness at one level and obscures it at another. Waehlen a consistent resolution (e.g., all to family, or all to morphospecies) and apply it uniformly
• Ignoring seasonality: Most insect communities change dramatically across seasons. Comparing a spring survey to an autumn survey confounds seasonal effects with any treatment or site differences. Vergleichen same-season data
• Reporting diversity indices ohne sample size: Shannon H' of 2.5 from 500 individuals is far more reliable than H' of 2.5 from 20 individuals. Always report sample sizes alongside indices, and use rarefaction for comparisons across different abundances

Verwandte Skills

• collect-preserve-specimens — collection methods, preservation, and labeling standards for the specimens gathered waehrend surveys
• identify-insect — morphological identification procedures for sorting and identifying survey specimens
• document-insect-sighting — photographic documentation protocols that complement physical collection
• observe-insect-behavior — behavioral observation methods for supplementing population data with ecological context