Curves And Paths

Core Concepts

Path

A Phaser.Curves.Path is a container that combines multiple Curves into one continuous compound curve. Curves in a Path do not need to be connected end-to-end. Only the order of curves affects point calculations along the path.

Created via factory: this.add.path(x, y) where x/y is the starting point.

Key properties:

• curves -- array of Phaser.Curves.Curve objects in the Path
• startPoint -- Vector2, the defined starting position
• autoClose -- boolean, if true getPoints() appends the first point at the end
• defaultDivisions -- number (default: 12), divisions per curve when calling getPoints()
• name -- string, empty by default, for developer use

Curves

All curve types extend Phaser.Curves.Curve (the base class). Every curve supports:

• getPoint(t, out) -- get a point at position t (0-1) based on curve parameterization
• getPointAt(u, out) -- get a point at position u (0-1) based on arc length (evenly spaced)
• getPoints(divisions, stepRate, out) -- array of points along the curve
• getSpacedPoints(divisions, stepRate, out) -- array of equidistant points by arc length
• getDistancePoints(distance) -- points spaced by pixel distance
• getLength() -- total arc length in pixels
• getBounds(out, accuracy) -- bounding Rectangle
• getTangent(t, out) / getTangentAt(u, out) -- unit tangent vector
• getStartPoint(out) / getEndPoint(out) -- first/last points
• getRandomPoint(out) -- random point on the curve
• draw(graphics, pointsTotal) -- render the curve onto a Graphics object
• active -- boolean, when false the parent Path skips this curve

PathFollower

A Phaser.GameObjects.PathFollower is a Sprite with the Components.PathFollower mixin. It uses an internal Tween (a number counter from 0 to 1) to advance along a Path each frame.

Created via factory: this.add.follower(path, x, y, texture, frame)

The PathFollower component provides:

• path -- the Phaser.Curves.Path being followed
• pathTween -- the internal Tween driving movement
• pathOffset -- Vector2, offset added to path coordinates
• pathVector -- Vector2, current position on the path
• pathDelta -- Vector2, distance traveled since last frame
• rotateToPath -- boolean, auto-rotate to face path direction
• pathRotationOffset -- number (degrees), added to auto-rotation

Common Patterns

Creating Paths with Chained Curves

Path has convenience methods that create curves starting from the previous end point:

const path = this.add.path(100, 500);

path.lineTo(300, 100);                          // straight line
path.cubicBezierTo(500, 100, 350, 50, 450, 50); // cubic bezier (endX, endY, cp1X, cp1Y, cp2X, cp2Y)
path.quadraticBezierTo(700, 400, 600, 100);     // quadratic bezier (endX, endY, cpX, cpY)
path.splineTo([                                  // spline through points
    new Phaser.Math.Vector2(750, 300),
    new Phaser.Math.Vector2(600, 500)
]);
path.ellipseTo(50, 80, 0, 270, false, 0);       // ellipse arc (xRadius, yRadius, startAngle, endAngle, clockwise, rotation)
path.circleTo(40);                               // shortcut for ellipseTo with equal radii and 0-360

// Jump to a new position without drawing (creates a gap)
path.moveTo(400, 400);
path.lineTo(500, 400);

// Close the path by connecting end to start
path.closePath();

Adding Standalone Curve Objects

const path = new Phaser.Curves.Path(0, 0);

// Add pre-constructed curve objects
const line = new Phaser.Curves.Line(new Phaser.Math.Vector2(0, 0), new Phaser.Math.Vector2(200, 200));
path.add(line);

const spline = new Phaser.Curves.Spline([ 200, 200, 300, 100, 400, 300 ]);
path.add(spline);

const ellipse = new Phaser.Curves.Ellipse(400, 300, 100, 60, 0, 360, false, 0);
path.add(ellipse);

Getting Points Along a Path

// Array of points (uses defaultDivisions per curve)
const points = path.getPoints();

// With explicit divisions per curve
const detailed = path.getPoints(32);

// Equally spaced points along the entire path
const spaced = path.getSpacedPoints(100);

// Single point at normalized position (0-1)
const midpoint = path.getPoint(0.5);

// Tangent vector at a position
const tangent = path.getTangent(0.5);

// Total path length in pixels
const length = path.getLength();

// Bounding rectangle
const bounds = path.getBounds();

Drawing Paths with Graphics

const graphics = this.add.graphics();

// Draw entire path
graphics.lineStyle(2, 0x00ff00, 1);
path.draw(graphics, 64); // 64 = points per curve for smoothness

// Draw individual curves
graphics.lineStyle(1, 0xff0000, 1);
path.curves[0].draw(graphics, 32);

// Draw debug points
const points = path.getSpacedPoints(50);
points.forEach(p => {
    graphics.fillStyle(0xffff00, 1);
    graphics.fillCircle(p.x, p.y, 3);
});

PathFollower Sprite

const path = this.add.path(100, 200);
path.lineTo(400, 400);
path.lineTo(700, 200);

// Create follower
const enemy = this.add.follower(path, 100, 200, 'enemy');

// Start following with config
enemy.startFollow({
    duration: 3000,       // ms to traverse path
    positionOnPath: true, // snap to path start position
    rotateToPath: true,   // auto-rotate to face direction
    rotationOffset: 90,   // offset added to auto-rotation (degrees)
    repeat: -1,           // -1 = infinite repeat
    yoyo: true,           // reverse on each repeat
    from: 0,              // start position on path (0-1)
    to: 1,                // end position on path (0-1)
    startAt: 0,           // initial seek position
    ease: 'Sine.easeInOut' // any valid Phaser ease
});

// Control during playback
enemy.pauseFollow();
enemy.resumeFollow();
enemy.stopFollow();
enemy.isFollowing(); // returns boolean

// Change path at runtime
enemy.setPath(newPath);
enemy.setPath(newPath, { duration: 2000 }); // auto-starts

// Set rotation independently
enemy.setRotateToPath(true, 90); // (value, offsetDegrees)

PathFollower with Simple Duration

// Shorthand: pass just a duration number
enemy.startFollow(5000);

// Equivalent to:
enemy.startFollow({ duration: 5000 });

All Curve Types

Ellipse Curve Properties

The Ellipse curve has get/set properties for runtime modification:

• x, y -- center position
• xRadius, yRadius -- radii
• startAngle, endAngle -- in degrees (get/set convert to/from radians internally)
• clockwise -- boolean
• rotation -- in radians
• angle -- rotation in degrees (alternative to rotation)
• setWidth(value) / setHeight(value) -- sets radius to value/2

API Quick Reference

Path (Phaser.Curves.Path)

Base Curve (Phaser.Curves.Curve)

PathFollower Component

PathConfig (Phaser.Types.GameObjects.PathFollower.PathConfig)

The config also accepts all standard Tween properties: ease, repeat, yoyo, delay, hold, onComplete, etc.

Gotchas

1. getPoint(t) vs getPointAt(u) on curves. getPoint uses the raw curve parameter t, which does not produce evenly spaced points on most curve types. getPointAt maps through arc length for even spacing. On a Path, getPoint already accounts for arc length across the whole path.

2. Path moveTo creates an inactive curve. The MoveTo pseudo-curve has active: false and zero length. It only repositions the end point for the next curve. It does not draw anything and is skipped by getPoints() and draw().

3. PathFollower uses a Tween internally. The startFollow config is passed to scene.tweens.addCounter(). All tween properties (ease, delay, repeat, yoyo, callbacks) work. The tween is set to persist: true automatically.

4. PathFollower offset behavior. When positionOnPath: false (default), the follower's current position becomes the offset from the path start. When positionOnPath: true, the follower snaps to the path's start point and the offset is zeroed.

5. Ellipse angles are in degrees. The constructor and startAngle/endAngle properties accept degrees. Internally they are stored as radians. The rotation property is in radians, but angle is in degrees.

6. closePath vs autoClose. closePath() adds an explicit Line curve from end to start. autoClose = true only affects getPoints() and getSpacedPoints() output by appending the first point, without adding a curve.

7. Cached lengths can go stale. getCurveLengths() caches results based on array length only. If you modify a curve's control points, call path.updateArcLengths() to force recalculation.

8. cubicBezierTo parameter order with numbers. When passing numbers: cubicBezierTo(endX, endY, cp1X, cp1Y, cp2X, cp2Y). The end point comes first, not the control points. When passing Vector2 objects: cubicBezierTo(cp1, cp2, endPoint).

9. Spline needs at least 4 points. The Catmull-Rom interpolation used by Spline works best with 4+ points. With fewer points, the curve may not behave as expected.

10. Line curve arcLengthDivisions is 1. Unlike other curves (default 100), Line overrides this to 1 since a line is inherently uniform. No need to adjust it.

Source File Map