Fea Mesh Generator

Prerequisites

• CAD geometry or imaging data available
• Material regions identified
• Analysis requirements defined
• Contact interfaces specified

Best Practices

• Verify mesh quality metrics before analysis
• Conduct mesh convergence studies
• Use appropriate element types for physics
• Document mesh parameters for reproducibility

Process Integration

This skill integrates with the following processes:

• Finite Element Analysis for Medical Devices
• Orthopedic Implant Biomechanical Testing
• Gait Analysis and Musculoskeletal Modeling
• Scaffold Fabrication and Characterization

Dependencies

• ANSYS meshing tools
• Abaqus CAE
• COMSOL Multiphysics
• Mimics/3-matic
• Open-source mesh tools (Gmsh, TetGen)

Configuration

fea-mesh-generator:
  element-types:
    - tetrahedral
    - hexahedral
    - wedge
    - shell
    - beam
  quality-metrics:
    - aspect-ratio
    - jacobian
    - skewness
    - warpage
  mesh-sources:
    - CAD
    - STL
    - CT-imaging
    - MRI-imaging

Output Artifacts

• Finite element meshes
• Mesh quality reports
• Convergence study results
• Element statistics
• Boundary condition assignments
• Material region definitions
• Contact surface definitions
• Mesh parameter documentation

Quality Criteria

• Mesh quality metrics within acceptable limits
• Convergence demonstrated for key outputs
• Element types appropriate for analysis physics
• Mesh captures geometric features adequately
• Contact surfaces properly defined
• Documentation supports reproducibility