Scienceworld Circuit Builder

4. Testing & Conclusion

1. Observe: After completing the connections, wait1 for 1-2 iterations.
2. Check Result: look around. If the light bulb is on, the target object is electrically conductive.
3. Final Action: Based on the result:
   • If conductive: move <TargetObject> to blue box
   • If non-conductive: move <TargetObject> to orange box

5. Key Principles

• Circuit Logic: This builds a simple series circuit: Battery -> Wire1 -> Light Bulb -> Wire3 -> Target Object -> Wire2 -> Battery.
• Action Precision: Use the exact object names and connection points (anode, cathode, terminal 1/2) as observed in the environment.
• Error Handling: If a component is missing, examine the room (look around) to identify available substitutes before proceeding.

6. Example

Task: Test whether a metal pot is electrically conductive.

1. teleport to workshop
2. pick up metal pot
3. connect battery anode to orange wire terminal 1
4. connect battery cathode to yellow wire terminal 1
5. connect orange wire terminal 2 to blue light bulb cathode
6. connect green wire terminal 2 to anode in blue light bulb
7. connect metal pot terminal 1 to yellow wire terminal 2
8. connect metal pot terminal 2 to green wire terminal 1
9. wait1 — observe if the light bulb turns on
10. Light bulb is on → move metal pot to blue box (conductive)