Browser Automation with agent-browser

# Chain open + wait + snapshot in one call
agent-browser open https://example.com && agent-browser wait --load networkidle && agent-browser snapshot -i

# Chain multiple interactions
agent-browser fill @e1 "[email protected]" && agent-browser fill @e2 "password123" && agent-browser click @e3

# Navigate and capture
agent-browser open https://example.com && agent-browser wait --load networkidle && agent-browser screenshot page.png

When to chain: Use && when you don't need to read the output of an intermediate command before proceeding (e.g., open + wait + screenshot). Run commands separately when you need to parse the output first (e.g., snapshot to discover refs, then interact using those refs).

Essential Commands

# Navigation
agent-browser open <url>              # Navigate (aliases: goto, navigate)
agent-browser close                   # Close browser

# Snapshot
agent-browser snapshot -i             # Interactive elements with refs (recommended)
agent-browser snapshot -i -C          # Include cursor-interactive elements (divs with onclick, cursor:pointer)
agent-browser snapshot -s "#selector" # Scope to CSS selector

# Interaction (use @refs from snapshot)
agent-browser click @e1               # Click element
agent-browser click @e1 --new-tab     # Click and open in new tab
agent-browser fill @e2 "text"         # Clear and type text
agent-browser type @e2 "text"         # Type without clearing
agent-browser select @e1 "option"     # Select dropdown option
agent-browser check @e1               # Check checkbox
agent-browser press Enter             # Press key
agent-browser scroll down 500         # Scroll page

# Get information
agent-browser get text @e1            # Get element text
agent-browser get url                 # Get current URL
agent-browser get title               # Get page title

# Wait
agent-browser wait @e1                # Wait for element
agent-browser wait --load networkidle # Wait for network idle
agent-browser wait --url "**/page"    # Wait for URL pattern
agent-browser wait 2000               # Wait milliseconds

# Capture
agent-browser screenshot              # Screenshot to temp dir
agent-browser screenshot --full       # Full page screenshot
agent-browser screenshot --annotate   # Annotated screenshot with numbered element labels
agent-browser pdf output.pdf          # Save as PDF

# Diff (compare page states)
agent-browser diff snapshot                          # Compare current vs last snapshot
agent-browser diff snapshot --baseline before.txt    # Compare current vs saved file
agent-browser diff screenshot --baseline before.png  # Visual pixel diff
agent-browser diff url <url1> <url2>                 # Compare two pages
agent-browser diff url <url1> <url2> --wait-until networkidle  # Custom wait strategy
agent-browser diff url <url1> <url2> --selector "#main"  # Scope to element

Common Patterns

Form Submission

agent-browser open https://example.com/signup
agent-browser snapshot -i
agent-browser fill @e1 "Jane Doe"
agent-browser fill @e2 "[email protected]"
agent-browser select @e3 "California"
agent-browser check @e4
agent-browser click @e5
agent-browser wait --load networkidle

Authentication with State Persistence

# Login once and save state
agent-browser open https://app.example.com/login
agent-browser snapshot -i
agent-browser fill @e1 "$USERNAME"
agent-browser fill @e2 "$PASSWORD"
agent-browser click @e3
agent-browser wait --url "**/dashboard"
agent-browser state save auth.json

# Reuse in future sessions
agent-browser state load auth.json
agent-browser open https://app.example.com/dashboard

Session Persistence

# Auto-save/restore cookies and localStorage across browser restarts
agent-browser --session-name myapp open https://app.example.com/login
# ... login flow ...
agent-browser close  # State auto-saved to ~/.agent-browser/sessions/

# Next time, state is auto-loaded
agent-browser --session-name myapp open https://app.example.com/dashboard

# Encrypt state at rest
export AGENT_BROWSER_ENCRYPTION_KEY=$(openssl rand -hex 32)
agent-browser --session-name secure open https://app.example.com

# Manage saved states
agent-browser state list
agent-browser state show myapp-default.json
agent-browser state clear myapp
agent-browser state clean --older-than 7

Data Extraction

agent-browser open https://example.com/products
agent-browser snapshot -i
agent-browser get text @e5           # Get specific element text
agent-browser get text body > page.txt  # Get all page text

# JSON output for parsing
agent-browser snapshot -i --json
agent-browser get text @e1 --json

Parallel Sessions

agent-browser --session site1 open https://site-a.com
agent-browser --session site2 open https://site-b.com

agent-browser --session site1 snapshot -i
agent-browser --session site2 snapshot -i

agent-browser session list

Connect to Existing Chrome

# Auto-discover running Chrome with remote debugging enabled
agent-browser --auto-connect open https://example.com
agent-browser --auto-connect snapshot

# Or with explicit CDP port
agent-browser --cdp 9222 snapshot

Visual Browser (Debugging)

agent-browser --headed open https://example.com
agent-browser highlight @e1          # Highlight element
agent-browser record start demo.webm # Record session
agent-browser profiler start         # Start Chrome DevTools profiling
agent-browser profiler stop trace.json # Stop and save profile (path optional)

Local Files (PDFs, HTML)

# Open local files with file:// URLs
agent-browser --allow-file-access open file:///path/to/document.pdf
agent-browser --allow-file-access open file:///path/to/page.html
agent-browser screenshot output.png

iOS Simulator (Mobile Safari)

# List available iOS simulators
agent-browser device list

# Launch Safari on a specific device
agent-browser -p ios --device "iPhone 16 Pro" open https://example.com

# Same workflow as desktop - snapshot, interact, re-snapshot
agent-browser -p ios snapshot -i
agent-browser -p ios tap @e1          # Tap (alias for click)
agent-browser -p ios fill @e2 "text"
agent-browser -p ios swipe up         # Mobile-specific gesture

# Take screenshot
agent-browser -p ios screenshot mobile.png

# Close session (shuts down simulator)
agent-browser -p ios close

Requirements: macOS with Xcode, Appium (npm install -g appium && appium driver install xcuitest)

Real devices: Works with physical iOS devices if pre-configured. Use --device "<UDID>" where UDID is from xcrun xctrace list devices.

Diffing (Verifying Changes)

Use diff snapshot after performing an action to verify it had the intended effect. This compares the current accessibility tree against the last snapshot taken in the session.

# Typical workflow: snapshot -> action -> diff
agent-browser snapshot -i          # Take baseline snapshot
agent-browser click @e2            # Perform action
agent-browser diff snapshot        # See what changed (auto-compares to last snapshot)

For visual regression testing or monitoring:

# Save a baseline screenshot, then compare later
agent-browser screenshot baseline.png
# ... time passes or changes are made ...
agent-browser diff screenshot --baseline baseline.png

# Compare staging vs production
agent-browser diff url https://staging.example.com https://prod.example.com --screenshot

diff snapshot output uses + for additions and - for removals, similar to git diff. diff screenshot produces a diff image with changed pixels highlighted in red, plus a mismatch percentage.

Timeouts and Slow Pages

The default Playwright timeout is 60 seconds for local browsers. For slow websites or large pages, use explicit waits instead of relying on the default timeout:

# Wait for network activity to settle (best for slow pages)
agent-browser wait --load networkidle

# Wait for a specific element to appear
agent-browser wait "#content"
agent-browser wait @e1

# Wait for a specific URL pattern (useful after redirects)
agent-browser wait --url "**/dashboard"

# Wait for a JavaScript condition
agent-browser wait --fn "document.readyState === 'complete'"

# Wait a fixed duration (milliseconds) as a last resort
agent-browser wait 5000

When dealing with consistently slow websites, use wait --load networkidle after open to ensure the page is fully loaded before taking a snapshot. If a specific element is slow to render, wait for it directly with wait <selector> or wait @ref.

Session Management and Cleanup

When running multiple agents or automations concurrently, always use named sessions to avoid conflicts:

# Each agent gets its own isolated session
agent-browser --session agent1 open site-a.com
agent-browser --session agent2 open site-b.com

# Check active sessions
agent-browser session list

Always close your browser session when done to avoid leaked processes:

agent-browser close                    # Close default session
agent-browser --session agent1 close   # Close specific session

If a previous session was not closed properly, the daemon may still be running. Use agent-browser close to clean it up before starting new work.

Ref Lifecycle (Important)

Refs (@e1, @e2, etc.) are invalidated when the page changes. Always re-snapshot after:

• Clicking links or buttons that navigate
• Form submissions
• Dynamic content loading (dropdowns, modals)

agent-browser click @e5              # Navigates to new page
agent-browser snapshot -i            # MUST re-snapshot
agent-browser click @e1              # Use new refs

Annotated Screenshots (Vision Mode)

Use --annotate to take a screenshot with numbered labels overlaid on interactive elements. Each label [N] maps to ref @eN. This also caches refs, so you can interact with elements immediately without a separate snapshot.

agent-browser screenshot --annotate
# Output includes the image path and a legend:
#   [1] @e1 button "Submit"
#   [2] @e2 link "Home"
#   [3] @e3 textbox "Email"
agent-browser click @e2              # Click using ref from annotated screenshot

Use annotated screenshots when:

• The page has unlabeled icon buttons or visual-only elements
• You need to verify visual layout or styling
• Canvas or chart elements are present (invisible to text snapshots)
• You need spatial reasoning about element positions

Semantic Locators (Alternative to Refs)

When refs are unavailable or unreliable, use semantic locators:

agent-browser find text "Sign In" click
agent-browser find label "Email" fill "[email protected]"
agent-browser find role button click --name "Submit"
agent-browser find placeholder "Search" type "query"
agent-browser find testid "submit-btn" click

JavaScript Evaluation (eval)

Use eval to run JavaScript in the browser context. Shell quoting can corrupt complex expressions -- use --stdin or -b to avoid issues.

# Simple expressions work with regular quoting
agent-browser eval 'document.title'
agent-browser eval 'document.querySelectorAll("img").length'

# Complex JS: use --stdin with heredoc (RECOMMENDED)
agent-browser eval --stdin <<'EVALEOF'
JSON.stringify(
  Array.from(document.querySelectorAll("img"))
    .filter(i => !i.alt)
    .map(i => ({ src: i.src.split("/").pop(), width: i.width }))
)
EVALEOF

# Alternative: base64 encoding (avoids all shell escaping issues)
agent-browser eval -b "$(echo -n 'Array.from(document.querySelectorAll("a")).map(a => a.href)' | base64)"

Why this matters: When the shell processes your command, inner double quotes, ! characters (history expansion), backticks, and $() can all corrupt the JavaScript before it reaches agent-browser. The --stdin and -b flags bypass shell interpretation entirely.

Rules of thumb:

• Single-line, no nested quotes -> regular eval 'expression' with single quotes is fine
• Nested quotes, arrow functions, template literals, or multiline -> use eval --stdin <<'EVALEOF'
• Programmatic/generated scripts -> use eval -b with base64

Configuration File

Create agent-browser.json in the project root for persistent settings:

{
  "headed": true,
  "proxy": "http://localhost:8080",
  "profile": "./browser-data"
}

Priority (lowest to highest): ~/.agent-browser/config.json < ./agent-browser.json < env vars < CLI flags. Use --config <path> or AGENT_BROWSER_CONFIG env var for a custom config file (exits with error if missing/invalid). All CLI options map to camelCase keys (e.g., --executable-path -> "executablePath"). Boolean flags accept true/false values (e.g., --headed false overrides config). Extensions from user and project configs are merged, not replaced.

Deep-Dive Documentation

Ready-to-Use Templates

./templates/form-automation.sh https://example.com/form
./templates/authenticated-session.sh https://app.example.com/login
./templates/capture-workflow.sh https://example.com ./output