Mushroom Cultivation

第 1 步：Choose Your Species

Match species to your environment and experience level.

Beginner-Friendly Species:
+--------------------+------------------+------------------+------------------+
| Species            | Substrate        | Temperature      | Difficulty       |
+--------------------+------------------+------------------+------------------+
| Oyster mushroom    | Straw, coffee    | 15-24C (60-75F)  | Very easy        |
| (Pleurotus spp.)   | grounds, sawdust |                  | (most forgiving) |
+--------------------+------------------+------------------+------------------+
| Shiitake           | Hardwood logs    | 13-21C (55-70F)  | Easy             |
| (Lentinula edodes) | or sawdust blocks|                  | (outdoor logs)   |
+--------------------+------------------+------------------+------------------+
| Lion's mane        | Hardwood sawdust | 18-24C (65-75F)  | Moderate         |
| (Hericium          | (supplemented)   |                  | (needs humidity) |
| erinaceus)         |                  |                  |                  |
+--------------------+------------------+------------------+------------------+
| Wine cap           | Wood chips,      | 10-27C (50-80F)  | Easy             |
| (Stropharia        | straw mulch      |                  | (outdoor beds)   |
| rugosoannulata)    | (outdoor beds)   |                  |                  |
+--------------------+------------------+------------------+------------------+

Start with oyster mushrooms — they colonize fast, fruit reliably,
and tolerate imperfect conditions.

预期结果： Species selected that matches your environment, substrate availability, and experience level.

失败处理： If unsure, start with blue oyster mushroom (Pleurotus ostreatus) on straw. It is the most forgiving species for beginners.

第 2 步：Prepare the Substrate

The substrate provides nutrition for the mycelium. It must be clean enough to give your mushroom a head start over competitors.

Substrate Preparation Methods:

PASTEURIZATION (for straw — easiest):
1. Chop straw to 2-4 inch lengths
2. Submerge in hot water (65-80C / 150-175F) for 60-90 minutes
3. Drain thoroughly — substrate should be moist but not dripping
   (squeeze test: a firm squeeze produces a few drops, not a stream)
4. Cool to below 30C (85F) before inoculation

STERILIZATION (for supplemented sawdust — more reliable):
1. Mix hardwood sawdust with 10-20% wheat bran or soy hull
2. Hydrate to 60-65% moisture content
3. Fill into autoclavable bags with filter patches
4. Pressure cook at 15 PSI for 90-120 minutes
5. Cool completely before inoculation (overnight is safest)

COLD WATER LIME BATH (alternative pasteurization):
1. Dissolve hydrated lime (calcium hydroxide) in cold water
   (approximately 1 cup per 50 gallons)
2. pH should reach 12+ (kills competitors without heat)
3. Soak straw for 12-18 hours
4. Drain and let excess water drip for 2-4 hours
5. pH will neutralize as the straw dries

预期结果： Substrate is clean (pasteurized or sterilized), at correct moisture content, and cooled to room temperature.

失败处理： If contamination appears after inoculation (green mold within the first week), the substrate was insufficiently pasteurized or the inoculation environment was too dirty. Start fresh with more rigorous pasteurization.

第 3 步：Inoculate

Introduce spawn to the prepared substrate.

Inoculation Protocol:
1. Work in a clean environment: wash hands, clean surfaces, minimize airflow
   (still air is better than a breeze carrying contaminants)
2. Spawn rate: 10-20% spawn by weight relative to wet substrate
   (more spawn = faster colonization = less contamination risk)
3. Mix spawn thoroughly into the substrate (for bags/buckets)
   OR layer spawn between substrate layers
4. Pack into growing container:
   - Grow bags: fill loosely, fold and clip top
   - 5-gallon buckets: drill 1/2" holes in sides (every 6 inches),
     fill with inoculated substrate, cap loosely
   - Logs: drill holes, insert plug spawn, seal with wax
5. Label with species, date, and substrate type

Hygiene Priorities:
- Clean hands and surfaces
- Minimize time substrate is exposed to open air
- Work quickly and confidently
- If you touch a contaminated surface, re-clean before continuing

预期结果： Spawn is evenly distributed throughout the substrate in a clean container, ready for incubation.

失败处理： If spawn does not seem to be colonizing after 7-10 days (no visible white growth), check temperature (too cold slows growth), substrate moisture (too dry inhibits growth), and spawn viability (old or heat-damaged spawn may be dead).

第 4 步：Incubate

The mycelium colonizes the substrate during incubation.

Incubation Conditions:
+--------------------+------------------------------------------+
| Parameter          | Target                                   |
+--------------------+------------------------------------------+
| Temperature        | Species-specific (generally 20-25C /     |
|                    | 68-77F for most species)                 |
+--------------------+------------------------------------------+
| Light              | Dark or dim — direct light not needed    |
|                    | during colonization                      |
+--------------------+------------------------------------------+
| Air exchange       | Minimal — CO2 buildup is acceptable      |
|                    | during colonization (loose lid is enough)|
+--------------------+------------------------------------------+
| Duration           | 2-4 weeks (until substrate is fully      |
|                    | white with mycelium)                     |
+--------------------+------------------------------------------+
| Monitoring         | Check every 3-4 days for contamination   |
|                    | (green, black, orange, or pink mold)     |
+--------------------+------------------------------------------+

Contamination Response:
- Green mold (Trichoderma): most common competitor. If localized and
  small, remove the contaminated area. If widespread, discard the
  entire block/bag — Trichoderma wins once established.
- Black mold: discard immediately. Do not open indoors.
- Orange/pink: bacterial contamination from wet substrate. Discard.

预期结果： Full colonization — the substrate is uniformly white with mycelium and smells pleasantly mushroomy.

失败处理： Partial colonization with contamination means the race was lost. Start again with more spawn (higher ratio), better pasteurization, and cleaner inoculation practice.

第 5 步：Initiate Fruiting

Trigger the transition from vegetative growth to mushroom formation.

Fruiting Triggers:
1. Fresh air: increase air exchange (open container, fan nearby)
2. Light: indirect light for 12 hours/day (any spectrum works)
3. Temperature drop: reduce by 5-10C from incubation temperature
4. Humidity: maintain 85-95% relative humidity
   - Mist 2-3 times daily
   - Or use a fruiting chamber (plastic tub with perlite floor)
5. For bags: cut X-shaped slits where you want mushrooms to emerge
   For buckets: mushrooms emerge from the drilled holes

Fruiting Chamber (Simple SGFC — Shotgun Fruiting Chamber):
- Large plastic storage tub (50-100L)
- Drill 1/4" holes every 2 inches on all 6 sides (including bottom and lid)
- 4-5 inch layer of wet perlite on the bottom
- Place colonized blocks/bags on a wire rack above the perlite
- Mist walls 2-3 times daily
- Fan fresh air in by waving the lid 2-3 times daily

预期结果： Primordia (tiny mushroom pins) appear within 5-14 days of fruiting initiation.

失败处理： If no pins appear after 2 weeks: check humidity (too dry is the most common cause), light (some species need light to pin), and temperature (too warm delays pinning for many species).

第 6 步：Harvest and Manage Successive Flushes

Harvest Timing:
- Harvest just before or as the cap edges begin to flatten or turn upward
- For oysters: when the cap edges are still slightly curled downward
- For shiitake: when the cap is 70-80% open (partial veil still intact)
- For lion's mane: when spines are 0.5-1 cm long and still firm

Harvest Technique:
- Twist and pull gently at the base (preferred for most species)
- Or cut with a clean knife at the substrate surface
- Do not leave stumps that can rot and attract contamination

Successive Flushes:
- After harvesting, soak the block/bag in cold water for 12-24 hours
  (rehydration triggers the next flush)
- Return to fruiting conditions
- Expect 2-4 flushes, each smaller than the last
- Total yield: approximately 25-50% of wet substrate weight
  for oyster mushrooms over all flushes

预期结果： Fresh mushrooms harvested at optimal timing, with successive flushes extending the productive life of the substrate.

失败处理： If yields are poor (small, sparse mushrooms), the substrate may be depleted or contaminated. Supplemented substrates produce higher yields. If contamination appears between flushes, the block's productive life is over — compost it.

验证清单

• Species appropriate for environment and experience level
• Substrate was properly pasteurized or sterilized
• Spawn rate was 10-20% by weight
• Inoculation was performed with clean technique
• Full colonization was achieved before initiating fruiting
• Fruiting conditions (humidity, temperature, air exchange, light) were maintained
• Mushrooms were harvested at optimal timing
• Successive flushes were managed through rehydration

常见问题

• Insufficient pasteurization: The most common cause of failure. If contaminants appear within the first week, pasteurization was inadequate
• Too little spawn: Low spawn rates mean slow colonization, giving competitors more time. Use the recommended 10-20% ratio
• Low humidity during fruiting: Mushrooms are 90% water. If the air is dry, primordia abort (dry out before developing). Humidity below 80% during fruiting is too low
• No fresh air exchange: High CO2 during fruiting produces long, thin stems and small caps. Increase air exchange if stems are elongated
• Harvesting too late: Over-mature mushrooms drop spores (messy) and have shorter shelf life. Harvest on the early side
• Contamination panic: A small spot of mold on an otherwise healthy block is not necessarily fatal. Isolate the block, remove the contaminated area, and monitor. Discard only if contamination is spreading

相关技能

• fungi-identification — complementary skill; cultivation eliminates identification risk but understanding morphology aids in recognizing contamination species
• prepare-soil — spent mushroom substrate is excellent garden amendment; the cultivation cycle connects to soil building