Jlcpcb

Assembly Parts Library

Part Categories

LCSC Part Numbers

Every assembly component is identified by an LCSC Part Number (Cxxxxx, e.g., C14663). This is the definitive identifier for BOM matching. See the lcsc skill for searching parts.

Parts Search (JLCPCB-Specific)

• Parts library: https://jlcpcb.com/parts/componentSearch?searchTxt=<query>
• Basic parts only: https://jlcpcb.com/parts/basic_parts

BOM Format for Assembly

JLCPCB accepts CSV, XLS, or XLSX BOMs with these columns:

The column header for LCSC numbers must be exactly "LCSC Part #" or "LCSC Part Number" — typos cause upload failures.

KiCad BOM Export for JLCPCB

1. In KiCad schematic editor, add an LCSC field to each symbol with the LCSC part number
2. Export BOM as CSV with columns: Reference, Value, Footprint, LCSC
3. Rename columns to match JLCPCB's expected format:
   • Reference -> Designator
   • Value -> Comment
   • Footprint -> Footprint
   • LCSC -> LCSC Part #

For gerber export settings, CPL format, and stencil ordering, see the bom skill.

JLCPCB Official API (Approval Required)

Apply at https://api.jlcpcb.com. Access is gated — requires review based on order history and business profile.

Available APIs (once approved):

• Components API — real-time pricing, inventory, component specs
• PCB API — upload gerbers, get quotes, place orders, track status
• Stencil API — stencil quoting and ordering
• 3D Printing API — SLA/MJF/SLM/FDM ordering

PCB Design Rules (JLCPCB Capabilities)

Standard PCB (1-2 layers)

Multi-layer (4+ layers)

Importing DRU into KiCad

If you have a JLCPCB .kicad_dru design rules file, import it in KiCad Board Editor > Board Setup > Design Rules > Import Settings.

Assembly Constraints

Economic vs Standard Assembly

General Constraints

• Minimum order: 5 PCBs for assembly
• Unique parts limit: No hard limit, but each extended part adds $3
• Basic parts: No extra fee, pre-loaded on machines

Rotation Offsets

JLCPCB's pick-and-place uses different rotation conventions than KiCad for some footprints. Common offsets:

To fix rotation issues:

1. Add rotation corrections directly in the CPL file before uploading (adjust the Rotation column)
2. For custom footprints, verify pin 1 orientation matches JLCPCB expectations
3. JLCPCB's review step catches major errors, but subtle 180° rotations on symmetric parts (caps, resistors) may slip through
4. After first assembly order, note any rotation corrections needed and apply them to future CPL exports

Ordering Workflow

Prototype Order (Bare PCB + Stencil)

1. Export gerbers from KiCad (see bom skill for export settings)
2. Upload gerbers to https://cart.jlcpcb.com/quote — configure layers, thickness, color, qty
3. Add a framed stencil to the cart (uses paste layers from your gerbers)
4. Order — PCBs and stencil typically arrive in ~1 week

Production Order (Assembled Boards)

1. Export gerbers from KiCad (see bom skill for export settings)
2. Export BOM as CSV with LCSC part numbers (format above)
3. Export CPL (placement file) as CSV (see bom skill for format)
4. Upload gerbers to https://cart.jlcpcb.com/quote — configure layers, thickness, color, qty
5. Enable "PCB Assembly", select Economic or Standard
6. Upload BOM and CPL files
7. Review part matching — fix any unmatched parts by searching LCSC numbers
8. Confirm and order

Tips

• Prefer Basic parts — no extra fee, always in stock, faster assembly
• Check stock before ordering — extended parts can go out of stock; use the lcsc skill to search
• Panel by JLCPCB — for small boards, let JLCPCB panelize (cheaper) vs custom panels
• Lead-free solder — default is leaded (HASL); select lead-free HASL or ENIG if needed
• Impedance control — available for multi-layer boards, specify stackup in order notes
• Castellated holes — supported, enable in order options
• V-cuts and mouse bites — supported for panel separation
• Silkscreen minimum — 0.8mm height, 0.15mm line width for readable text
• Edge clearance — keep copper >=0.3mm from board edge (0.5mm recommended)