Interpret Mass Spectrum

手順

ステップ1: Identify Ionization Method and Expected Ion Types

Determine what species the spectrum contains before assigning peaks:

1. Classify the ionization method:

2. Note polarity mode: Positive mode produces cations; negative mode produces anions. ESI commonly uses both.
3. Check for adducts and clusters: Soft ionization often produces [M+Na]+ (M+23), [M+K]+ (M+39), [2M+H]+, and [2M+Na]+ in addition to [M+H]+. Identify these before assigning the molecular ion.
4. Identify multiply charged ions: In ESI, multiply charged ions appear at m/z = (M + nH) / n. Look for peaks separated by fractional m/z values (e.g., 0.5 Da spacing indicates z=2).

期待結果: Ionization method documented, expected ion types listed, and adducts/clusters identified so the true molecular ion can be determined.

失敗時: If the ionization method is unknown, examine the spectrum for clues: extensive fragmentation suggests EI, adduct patterns suggest ESI, and matrix peaks suggest MALDI. Consult the instrument log if available.

ステップ2: Determine Molecular Ion and Molecular Formula

Identify the molecular ion peak and derive the molecular formula:

1. Locate the molecular ion (M): In EI, M+. is the highest m/z peak with a reasonable isotope pattern (it may be weak or absent for labile compounds). In soft ionization, identify [M+H]+ or [M+Na]+ and subtract the adduct to get M.
2. Apply the nitrogen rule: An odd molecular weight indicates an odd number of nitrogen atoms. An even molecular weight indicates zero or an even number of nitrogen atoms.
3. Calculate degrees of unsaturation (DBE): DBE = (2C + 2 + N - H - X) / 2, where X = halogens. Each ring or pi bond contributes one DBE. Benzene = 4 DBE, carbonyl = 1 DBE.
4. Use high-resolution data: If exact mass is available, calculate the molecular formula using the mass defect. Compare the measured mass with all candidate formulas within the mass accuracy window (typically < 5 ppm for modern instruments).
5. Cross-check with isotope pattern: The observed isotope pattern must match the proposed molecular formula (see Step 3).

期待結果: Molecular ion identified, molecular weight determined, nitrogen rule applied, and a molecular formula proposed (confirmed by HRMS if available).

失敗時: If no molecular ion is visible in EI (common for thermally labile or highly branched compounds), try a softer ionization method. If the molecular ion is ambiguous, check for loss of common small fragments from the highest m/z peak (e.g., M-1, M-15, M-18 can help identify M).

ステップ3: Analyze Isotope Patterns

Use isotopic signatures to detect specific elements:

1. Monoisotopic elements: H, C, N, O, F, P, I have characteristic natural abundance patterns. For molecules containing only C, H, N, O, the M+1 peak is approximately 1.1% per carbon.
2. Halogen patterns:

3. Sulfur detection: 34S contributes 4.4% at M+2. An M+2 peak of approximately 4--5% relative to M (after correcting for the contribution of 13C2) suggests one sulfur atom.
4. Silicon detection: 29Si (5.1%) and 30Si (3.4%) produce distinctive M+1 and M+2 contributions.
5. Compare with calculated patterns: Use the proposed molecular formula to calculate the theoretical isotope pattern. Overlay with the observed pattern to confirm or refute the formula.

期待結果: Isotope pattern analyzed, presence or absence of Cl, Br, S, Si determined, and pattern consistent with the proposed molecular formula.

失敗時: If isotope resolution is insufficient (low-resolution instrument), the M+2 pattern may be unresolvable. Note the limitation and rely on exact mass and other spectroscopic data for elemental composition.

ステップ4: Identify Fragmentation Losses and Key Fragment Ions

Map the fragmentation pathways to extract structural information:

1. Catalog major fragments: List all peaks above 5--10% relative intensity with their m/z values.
2. Calculate neutral losses from the molecular ion:

3. Identify characteristic fragment ions:

4. Map fragmentation pathways: Connect fragment ions by successive losses to build a fragmentation tree from M down to low-mass fragments.
5. Identify rearrangement ions: McLafferty rearrangement (gamma-hydrogen transfer with beta-cleavage) produces even-electron ions from carbonyl-containing compounds. Retro-Diels-Alder fragmentation is characteristic of cyclohexene systems.

期待結果: All major fragment ions assigned, neutral losses calculated and correlated with structural features, fragmentation tree constructed.

失敗時: If fragments do not correspond to simple losses from the molecular ion, consider rearrangement processes. Unassigned fragments may indicate unexpected functional groups, impurities, or matrix/background peaks.

ステップ5: Assess Purity and Propose Structure

Evaluate the overall spectrum for purity indicators and assemble a structural proposal:

1. Purity check: In GC-MS or LC-MS, examine the chromatogram for additional peaks. In direct-infusion MS, look for unexpected ions that are not fragments of or adducts with the main analyte.
2. Background and contaminant peaks: Common contaminants include phthalate plasticizers (m/z 149, 167, 279), column bleed (siloxanes at m/z 207, 281, 355, 429 in GC-MS), and solvent clusters.
3. Structural proposal: Combine the molecular formula (Step 2), isotope pattern (Step 3), and fragmentation (Step 4) to propose a structure or a set of candidate structures.
4. Rank candidates: Use the fragmentation tree to rank structural candidates. The best structure explains the most fragment ions with the fewest ad hoc assumptions.
5. Cross-validate: Compare the proposed structure with data from other techniques (NMR, IR, UV-Vis). The mass spectrum alone rarely provides an unambiguous structure for novel compounds.

期待結果: Purity assessed, contaminants identified if present, and a structural proposal (or ranked candidate list) consistent with all MS data and cross-validated where possible.

失敗時: If the spectrum appears to contain multiple components and chromatographic separation was not used, flag the mixture and recommend LC-MS or GC-MS reanalysis. If no satisfactory structural proposal emerges, identify which additional data (HRMS, MS/MS, NMR) would resolve the ambiguity.

バリデーション

• Ionization method identified and expected ion types documented
• Molecular ion located and distinguished from adducts, fragments, and clusters
• Nitrogen rule applied and consistent with proposed formula
• Degrees of unsaturation calculated and accounted for in the structure
• Isotope pattern matches the proposed molecular formula
• Major fragment ions assigned with neutral losses and structural rationale
• Fragmentation tree constructed from molecular ion to low-mass fragments
• Common contaminant and background peaks identified and excluded
• Structural proposal cross-validated with other spectroscopic data

よくある落とし穴

• Misidentifying the molecular ion: In EI, the base peak is often a fragment, not the molecular ion. The molecular ion is the highest m/z peak with a chemically reasonable isotope pattern. Adduct ions in ESI ([M+Na]+, [2M+H]+) can also be mistaken for the molecular ion.
• Ignoring the nitrogen rule: An odd-mass molecular ion requires an odd number of nitrogens. Forgetting this leads to impossible molecular formulas.
• Confusing isobaric losses: A loss of 28 Da could be CO or C2H4; a loss of 29 could be CHO or C2H5. High-resolution MS or additional fragmentation data is needed to distinguish isobaric losses.
• Neglecting multiply charged ions: In ESI, doubly or triply charged ions appear at half or one-third the expected m/z. Look for non-integer spacing between isotope peaks as a diagnostic for multiple charges.
• Over-interpreting low-abundance peaks: Peaks below 1--2% relative intensity may be noise, isotope contributions, or minor contaminants rather than meaningful fragments.
• Assuming a pure sample: Many real-world spectra are mixtures. Always check chromatographic purity and look for ions inconsistent with the proposed structure.

関連スキル

• interpret-nmr-spectrum -- determine connectivity and hydrogen environments for structural confirmation
• interpret-ir-spectrum -- identify functional groups that explain observed fragmentation
• interpret-uv-vis-spectrum -- characterize chromophores in the analyte
• interpret-raman-spectrum -- complementary vibrational analysis
• plan-spectroscopic-analysis -- select and sequence analytical techniques before data acquisition
• interpret-chromatogram -- analyze GC or LC chromatographic data coupled with MS