Combat System

Ocupación

Categorías

Depuración

Combat Round Loop

combat_round() is called via call_out_walltime at intervals of _attack_speed + random_float(1.5) seconds (base speed default: 2.0).

combat_round()
  ├── clean_up_enemies()         — remove dead/gone enemies
  ├── highest_threat() → enemy   — pick target with most accumulated threat
  ├── valid_enemy(enemy)         — must be in same room and alive
  ├── swing(1, 0)                — execute attack(s)
  ├── GMCP Char.Status update    — current_enemy, current_enemy_health, current_enemies
  └── next_round()               — schedule next combat_round

Multi-Strike Logic (swing)

Each swing checks for a dual-wield opportunity:

if(random(100) < 5 + query_skill("combat.melee"))
    multi = 1;  // next recursive call uses off-hand weapon

When multi is set, a random weapon from non-main-slot weapons is used. The function recurses with decremented count.

MP is checked before each swing — if query_mp() <= 0.0, the attacker is "too exhausted" and the swing is skipped.

Hit Chance Formula — can_strike()

float chance = mudConfig("DEFAULT_HIT_CHANCE");   // 65.0

if(enemy->query_mp() < 0.0)
    chance += 25.0;    // exhausted enemies are easier to hit

chance = chance
    + (attacker_level - defender_level)          // effective levels
    + attacker_skill_level                       // weapon skill (query_skill_level)
    - (defender_ac * 2.0)                        // armor class doubled
    - defender_defense_skill_level;              // dodge or evade skill

result = random_float(100.0);
enemy->use_skill(defense_skill);   // defender trains defense on every attempt
return result < chance;

Skill routing by weapon type:

Damage Formula — strike_enemy()

base     = percent_of(5.0, enemy->query_max_hp());   // 5% of enemy max HP
variance = percent_of(25.0, base);                     // 25% of that
base    -= variance;
base    += random_float(variance);                     // restore 0..variance randomly

if(enemy->query_mp() < 0.0)
    base += 4.0;    // bonus vs exhausted

dam = base
    + query_effective_level()                          // attacker level
    - enemy->query_effective_level()                   // defender level
    + skill                                            // attacker weapon skill level
    - enemy->query_defense_amount(weapon_type)         // type-specific armor reduction
    - enemy->query_skill_level("combat.defense");      // generic defense skill

if(dam < 0.0) dam = 1.0;   // minimum 1 damage

After calculating damage:

1. Combat messaging via MESS_D->get_message("combat", wtype, to_int(ceil(dam))) and ACTION_D->action(...).
2. deliver_damage(enemy, dam, wtype) — dispatches to enemy.
3. adjust_mp(-random_float(5.0)) — each swing costs 0-5 MP.
4. add_threat(enemy, dam) — threat grows by damage dealt.
5. Weapon proc check: weapon->can_proc() then weapon->proc(name, self, enemy).

Damage Reception — receive_damage()

def = query_defense_amount(type);         // type-specific armor value
red = percent_of(def, damage);            // def% of damage is reduced

mod = mudConfig("DAMAGE_LEVEL_MODIFIER"); // 25
level_difference = attacker_level - defender_level;
mod = mod * level_difference;
red -= percent_of(mod, damage);           // level gap reduces/increases armor effectiveness

damage -= red;
if(damage < 0.0) damage = 0.0;

Then applies adjust_hp(-damage) and sets last_damaged_by / killed_by as appropriate.

Level modifier effect: Higher-level attackers reduce the defender's armor effectiveness. Lower-level attackers increase it.

Threat System

Threat values start at 1.0 on start_attack() and grow by damage dealt.

_current_enemies is the active combat mapping. _seen_enemies tracks all-time threat.

Defense / AC System — adjust_protection()

Called whenever equipment changes. Rebuilds _defense and _ac from all equipped items:

mapping adjust_protection() {
    // iterates query_equipped() values
    // sums ob->query_defense() mappings into _defense per damage type
    // sums ob->query_ac() into _ac
}

Starting and Stopping Combat

start_attack(object victim)

1. Adds victim to _current_enemies with threat 1.0.
2. Adds to _seen_enemies.
3. For NPCs: module("combat_memory", "add_to_memory", victim).
4. Schedules combat_round via call_out_walltime.
5. Calls victim->start_attack(this_object()) — mutual engagement.

stop_all_attacks()

Cancels combat call out, clears _current_enemies, sends GMCP clear.

prevent_combat(object victim)

Returns error string if:

• victim->query_peaceful() is set
• victim->query_no_combat() is set
• environment()->query_no_combat() is set

Returns 1 if combat is allowed.

NPC Weapon Properties

Used when the NPC has no wielded weapon object:

query_weapon_info(weapon) transparently handles both real weapon objects and NPC defaults, returning ([ "name", "type", "skill", "base" ]).

Weapon Proc System — std/modules/proc.c

Weapons inherit this module to add special effects on hit.

Proc Data Structure

_procs[name] = ([
    "function" : string | function,   // required
    "cooldown" : int,                  // seconds, default 1
    "weight"   : int,                  // selection weight, default 100
    "chance"   : int,                  // optional per-proc chance override
])

Key Functions

Integration

// In strike_enemy():
if(weapon && weapon->is_weapon())
    if(stringp(proc = weapon->can_proc()))
        weapon->proc(proc, this_object(), enemy);

Vitals — std/living/vitals.c

Variables

All private nomask float, defaults 100.0:

Query Functions

query_max_hp(), query_max_sp(), query_max_mp() all add boon modifiers unless called with raw = 1:

return max_hp + query_effective_boon("vital", "max_hp");

hp_ratio(), sp_ratio(), mp_ratio() return percentage floats.

Regen — heal_tick()

• Fires every regen_interval_pulses heartbeats (default: 10 pulses).
• Suppressed during combat (in_combat() check).
• Rates come from race module: module("race", "query_regen_rate").
• Human defaults: HP +2.0, SP +2.0, MP +4.0 per tick.
• No race module = no regen.

Condition Strings

query_condition_string() returns ({ hp_string, sp_string, mp_string }):

HP: "dead" (0) → "critical" (10) → "severely injured" (30) → "moderately injured" (45) → "injured" (60) → "hurt" (75) → "wounded" (90) → "bruised and nicked" (<100) → "healthy" (100)

SP: "brain dead" (5) → "depleted" (15.5) → ... → "fully charged" (100)

MP: "exhausted" (5) → "sluggish" (15.5) → ... → "full of stamina" (100)

Death Sequence — body.c::die()

Death is detected in the NPC heartbeat:

if(!is_dead() && query_hp() <= 0.0) {
    set_dead(1);
    die();
}

die() Flow

1. stop_all_attacks() — clear combat state
2. SU body ejection (if wizard is possessing this body)
3. simple_action("$N $vhave perished.") — room message
4. save_body() — persist player state
5. emit(SIG_PLAYER_DIED, this_object(), killed_by()) — signal
6. Create corpse: new(LIB_CORPSE) → corpse->setup_corpse(self, killer)
7. Loot drop: LOOT_D->loot_drop(killed_by(), self) if query_loot_table exists
8. Coin drop: LOOT_D->coin_drop(killed_by(), self) if query_coin_table exists
9. Move all inventory to corpse
10. Move all wealth to corpse (converted to coin objects)
11. Move corpse to room
12. Player path: BODY_D->create_ghost(privs), exec(ghost, self), move ghost to room
13. NPC path: ADVANCE_D->killXp(killed_by(), self) — award XP to killer
14. remove() — destroy this object

XP and Advancement — adm/daemons/advance.c

TNL Formula

toNextLevel(level) = to_int(baseTnl * pow(tnlRate, level - 1.0))
// Default: to_int(100 * 1.25^(level-1))

Kill XP Formula

xp       = toNextLevel(killed_level) / 10;    // 10% of killed NPC's TNL
variance = xp / 10;
xp       = xp - variance + random(variance);  // +/- 10% random

level_diff = killer_level - killed_level;

if(level_diff > 5)      // overlevel
    factor -= 0.05 * (level_diff - 5);    // -5% per level over threshold
else if(level_diff < 0) // underlevel
    factor += 0.05 * (-level_diff);       // +5% per level under

xp = to_int(xp * factor);

If PLAYER_AUTOLEVEL is true (default), advance() is called immediately after XP award.

Config Constants

NPC Combat Behavior — std/living/npc.c

Heartbeat

NPCs only tick when players are present:

void start_heart_beat() {
    if(player_check())
        set_heart_beat(mudConfig("DEFAULT_HEART_RATE"));
}

void stop_heart_beat() {
    if(!player_check() && query_hp() >= 100.0)
        set_heart_beat(0);
}

Heartbeat loop: clean_up_enemies() → cooldown() → death check → heal_tick() → evaluate_heart_beat() → process_boon().

Combat Memory Module

Automatically added to all NPCs. Remembers enemy names.

On init (player enters room), if target name is in memory:

void attack_on_sight(object target) {
    if(of(name, combat_memory)) {
        query_owner()->start_attack(target);
        query_owner()->strike_enemy(target);   // immediate free strike
        query_owner()->strike_enemy(target);   // second free strike
    }
}

Memory is populated from combat.c::start_attack():

if(!userp())
    module("combat_memory", "add_to_memory", victim);

GMCP Events

Signals

Combat Skill Names

Attack Speed

Actual interval per round = _attack_speed + random_float(1.5) seconds.

Gotchas

1. Death is detected in heartbeat, not in receive_damage. The dead flag is set in npc.c::heart_beat() when query_hp() <= 0.0. There can be a brief window between HP hitting zero and die() firing.
2. No regen during combat. heal_tick() returns immediately if in_combat().
3. NPCs stop ticking in empty rooms. No heartbeat = no regen, no boon processing, no AI. Developers expecting continuous background behavior need to understand this.
4. query_skill() vs query_skill_level(): For NPCs, query_skill() returns queryLevel() * 3.0 (shortcut), but query_skill_level() reads stored values. Combat formulas use query_skill_level().
5. setLevel() on NPCs wipes skills: npc.c::setLevel() calls adjust_skills_by_npc_level() which resets all stored skill levels to near-zero.
6. Proc _proc_chance field is maintained but not rolled against in can_proc() — the actual selection uses per-proc cooldowns and element_of_weighted.
7. Threat is accumulated damage, not an abstract aggro value. highest_threat() targets whoever has dealt the most damage to this living.