Design Postgis Tables

Geometry vs Geography

When to Use GEOMETRY

• Local/regional data within a single coordinate system
• Projected coordinates (meters, feet) for accurate area/distance calculations
• Complex spatial operations (buffering, unions, intersections)
• Performance-critical queries (Cartesian math is faster)
• Data already in a projected CRS (UTM, State Plane, etc.)

-- Regional data with projected coordinates (UTM Zone 10N for California)
CREATE TABLE local_parcels (
    id BIGINT GENERATED ALWAYS AS IDENTITY PRIMARY KEY,
    parcel_number TEXT NOT NULL,
    boundary GEOMETRY(POLYGON, 26910),  -- UTM Zone 10N (meters)
    area_sqm DOUBLE PRECISION GENERATED ALWAYS AS (ST_Area(boundary)) STORED
);

When to Use GEOGRAPHY

• Global data spanning multiple continents/hemispheres
• GPS coordinates (latitude/longitude in decimal degrees)
• Accurate distance calculations on Earth's surface (great circle)
• Simple spatial operations (distance, containment)
• Data from GPS devices, geocoding services, or web maps

-- Global data with geodetic calculations
CREATE TABLE global_offices (
    id BIGINT GENERATED ALWAYS AS IDENTITY PRIMARY KEY,
    name TEXT NOT NULL,
    city TEXT NOT NULL,
    location GEOGRAPHY(POINT, 4326)  -- WGS84 (lat/lon)
);

-- Distance in meters (accurate spherical calculation)
SELECT
    a.name AS office_a,
    b.name AS office_b,
    ST_Distance(a.location, b.location) / 1000 AS distance_km
FROM global_offices a
CROSS JOIN global_offices b
WHERE a.id < b.id;

Comparison Table

Geometry Types

Point Types

-- Single location (stores, sensors, events)
location GEOMETRY(POINT, 4326)

-- Multiple discrete locations (multi-branch business)
locations GEOMETRY(MULTIPOINT, 4326)

-- 3D point with elevation
location_3d GEOMETRY(POINTZ, 4326)

-- Point with measure value (linear referencing)
location_m GEOMETRY(POINTM, 4326)

Use POINT for: Store locations, sensor positions, event coordinates, addresses, POIs Use MULTIPOINT for: Multiple related locations stored as single feature

Line Types

-- Single path (road segment, river, route)
path GEOMETRY(LINESTRING, 4326)

-- Multiple paths (road network, transit lines)
network GEOMETRY(MULTILINESTRING, 4326)

-- 3D line with elevation profile
trail_3d GEOMETRY(LINESTRINGZ, 4326)

Use LINESTRING for: Roads, rivers, pipelines, GPS tracks, routes Use MULTILINESTRING for: Disconnected road segments, river systems

Polygon Types

-- Single area (parcel, building footprint, zone)
boundary GEOMETRY(POLYGON, 4326)

-- Multiple areas (archipelago, fragmented habitat)
territories GEOMETRY(MULTIPOLYGON, 4326)

-- 3D polygon (building with height)
footprint_3d GEOMETRY(POLYGONZ, 4326)

Use POLYGON for: Property boundaries, administrative areas, service zones Use MULTIPOLYGON for: Countries with islands, fragmented regions

Generic Types

-- Any geometry type (flexible schema)
geom GEOMETRY(GEOMETRY, 4326)

-- Collection of mixed types
features GEOMETRY(GEOMETRYCOLLECTION, 4326)

Use GEOMETRY for: Flexible schemas accepting multiple types Avoid GEOMETRYCOLLECTION: Prefer homogeneous types for better indexing

Coordinate Systems (SRID)

Common SRIDs

SRID Best Practices

• Store in WGS84 (4326) for interoperability and GPS data
• Transform to projected CRS for accurate measurements
• Never mix SRIDs in spatial operations without explicit transformation
• Use appropriate local CRS for area/distance calculations requiring high precision

-- Store in WGS84, calculate in UTM
CREATE TABLE survey_points (
    id BIGINT GENERATED ALWAYS AS IDENTITY PRIMARY KEY,
    location GEOMETRY(POINT, 4326),  -- Storage: WGS84
    CONSTRAINT valid_location CHECK (ST_IsValid(location))
);

-- Calculate distance in meters using UTM projection
SELECT
    a.id AS point_a,
    b.id AS point_b,
    ST_Distance(
        ST_Transform(a.location, 26910),  -- Transform to UTM
        ST_Transform(b.location, 26910)
    ) AS distance_meters
FROM survey_points a
CROSS JOIN survey_points b
WHERE a.id < b.id;

Spatial Indexing

GiST Index (Default)

Most versatile spatial index. Use for all geometry/geography columns.

-- Geometry (most common)
CREATE INDEX idx_your_table_geom_gist ON your_table_name USING GIST (geom);

-- Geography (GiST is the supported option)
CREATE INDEX idx_your_table_geog_gist ON your_table_name USING GIST (geog);

-- Analyze after index creation
VACUUM ANALYZE your_table_name;

Supports: All spatial operators (&&, @>, <@, ~=, <->) Best for: General-purpose spatial queries, mixed query patterns

BRIN Index

Block Range Index for very large, naturally ordered datasets.

-- BRIN for very large, append-only GEOMETRY tables (geography uses GiST)
CREATE INDEX idx_your_table_geom_brin
    ON your_table_name
    USING BRIN (geom)
    WITH (pages_per_range = 128);

Supports: Bounding box operators (&&, @>, <@) Best for: Append-only tables, time-series spatial data, very large datasets (>100M rows) Trade-off: Much smaller than GiST, but less precise filtering

SP-GiST Index

Space-partitioned GiST for point data with specific distributions.

-- SP-GiST for GEOMETRY(POINT, ...) only
CREATE INDEX idx_sensors_location_spgist
    ON sensors
    USING SPGIST (location);

Best for: Point-only data, quadtree-friendly distributions Not for: Complex geometries, mixed types

Index Selection Guide

Table Design Examples

Points of Interest (POI)

CREATE TABLE pois (
    id BIGINT GENERATED ALWAYS AS IDENTITY PRIMARY KEY,
    name TEXT NOT NULL,
    category TEXT NOT NULL,
    location GEOGRAPHY(POINT, 4326) NOT NULL,
    address TEXT,
    metadata JSONB DEFAULT '{}',
    created_at TIMESTAMPTZ NOT NULL DEFAULT now(),
    CONSTRAINT valid_category CHECK (category IN (
        'restaurant', 'hotel', 'gas_station', 'hospital', 'school'
    ))
);

-- Spatial index
CREATE INDEX idx_pois_location ON pois USING GIST (location);

-- Category + location for filtered spatial queries
CREATE INDEX idx_pois_category ON pois (category);

-- Find restaurants within 1km
SELECT name, address,
       ST_Distance(
         location,
         ST_SetSRID(ST_MakePoint(-122.4194, 37.7749), 4326)::GEOGRAPHY
       ) AS distance_m
FROM pois
WHERE category = 'restaurant'
  AND ST_DWithin(
    location,
    ST_SetSRID(ST_MakePoint(-122.4194, 37.7749), 4326)::GEOGRAPHY,
    1000
  )
ORDER BY distance_m;

Property Parcels

CREATE TABLE parcels (
    id BIGINT GENERATED ALWAYS AS IDENTITY PRIMARY KEY,
    parcel_id TEXT NOT NULL UNIQUE,
    owner_name TEXT,
    boundary GEOMETRY(MULTIPOLYGON, 4326) NOT NULL,
    centroid GEOMETRY(POINT, 4326) GENERATED ALWAYS AS (ST_Centroid(boundary)) STORED,
    area_sqm DOUBLE PRECISION GENERATED ALWAYS AS (
        ST_Area(boundary::GEOGRAPHY)
    ) STORED,
    perimeter_m DOUBLE PRECISION GENERATED ALWAYS AS (
        ST_Perimeter(boundary::GEOGRAPHY)
    ) STORED,
    CONSTRAINT valid_boundary CHECK (ST_IsValid(boundary)),
    CONSTRAINT closed_boundary CHECK (ST_IsClosed(ST_ExteriorRing(ST_GeometryN(boundary, 1))))
);

CREATE INDEX idx_parcels_boundary ON parcels USING GIST (boundary);
CREATE INDEX idx_parcels_centroid ON parcels USING GIST (centroid);

-- Find parcels intersecting a search area
SELECT parcel_id, owner_name, area_sqm
FROM parcels
WHERE ST_Intersects(boundary, ST_MakeEnvelope(-122.5, 37.7, -122.4, 37.8, 4326));

GPS Tracking

CREATE TABLE gps_tracks (
    id BIGINT GENERATED ALWAYS AS IDENTITY PRIMARY KEY,
    device_id TEXT NOT NULL,
    recorded_at TIMESTAMPTZ NOT NULL,
    location GEOGRAPHY(POINT, 4326) NOT NULL,
    speed_kmh DOUBLE PRECISION,
    heading DOUBLE PRECISION,
    accuracy_m DOUBLE PRECISION
);

-- Composite index for device + time queries
CREATE INDEX idx_gps_device_time ON gps_tracks (device_id, recorded_at DESC);

-- Spatial index for location queries
CREATE INDEX idx_gps_location ON gps_tracks USING GIST (location);

-- Note: GEOGRAPHY supports GiST; BRIN is for GEOMETRY (when appropriate).

-- Create linestring from track points
SELECT
    device_id,
    ST_MakeLine(location::GEOMETRY ORDER BY recorded_at) AS track_line,
    MIN(recorded_at) AS start_time,
    MAX(recorded_at) AS end_time
FROM gps_tracks
WHERE device_id = 'device_001'
  AND recorded_at >= '2024-01-01'
GROUP BY device_id;

Service Areas / Coverage Zones

CREATE TABLE service_zones (
    id BIGINT GENERATED ALWAYS AS IDENTITY PRIMARY KEY,
    zone_name TEXT NOT NULL,
    zone_type TEXT NOT NULL,
    boundary GEOMETRY(POLYGON, 4326) NOT NULL,
    population INTEGER,
    active BOOLEAN NOT NULL DEFAULT true,
    CONSTRAINT valid_zone_type CHECK (zone_type IN ('delivery', 'service', 'coverage')),
    CONSTRAINT valid_boundary CHECK (ST_IsValid(boundary))
);

CREATE INDEX idx_zones_boundary ON service_zones USING GIST (boundary);
CREATE INDEX idx_zones_active ON service_zones (active) WHERE active = true;

-- Check if location is within any active service zone
SELECT zone_name, zone_type
FROM service_zones
WHERE active = true
  AND ST_Contains(boundary, ST_SetSRID(ST_MakePoint(-122.4194, 37.7749), 4326));

Performance Patterns

Use ST_DWithin Instead of ST_Distance

-- SLOW: calculates distance for all rows
SELECT * FROM pois
WHERE ST_Distance(location, ref_point) < 1000;

-- FAST: uses spatial index
SELECT * FROM pois
WHERE ST_DWithin(location, ref_point, 1000);

Use && for Bounding Box Pre-filtering

-- Bounding box operator leverages spatial index
SELECT * FROM parcels
WHERE boundary && ST_MakeEnvelope(-122.5, 37.7, -122.4, 37.8, 4326)
  AND ST_Intersects(boundary, search_polygon);

Avoid Functions on Indexed Columns

-- SLOW: function prevents index usage
SELECT * FROM parcels WHERE ST_Area(boundary) > 10000;

-- FAST: use generated column with regular index
ALTER TABLE parcels ADD COLUMN area_sqm DOUBLE PRECISION
    GENERATED ALWAYS AS (ST_Area(boundary::GEOGRAPHY)) STORED;
CREATE INDEX idx_parcels_area ON parcels (area_sqm);
SELECT * FROM parcels WHERE area_sqm > 10000;

Simplify Geometries for Display

-- Reduce complexity for web display (tolerance in CRS units)
SELECT
    id,
    name,
    ST_AsGeoJSON(ST_Simplify(boundary, 0.0001)) AS geojson
FROM parcels;

Use Appropriate Precision

-- Reduce coordinate precision for storage efficiency
UPDATE locations SET geom = ST_ReducePrecision(geom, 0.000001);

-- GeoJSON with limited decimal places
SELECT ST_AsGeoJSON(location, 6) AS geojson FROM pois;

Data Validation

Geometry Validity Checks

-- Add validity constraint
ALTER TABLE parcels ADD CONSTRAINT valid_geom CHECK (ST_IsValid(boundary));

-- Find and fix invalid geometries
SELECT id, ST_IsValidReason(boundary) AS reason
FROM parcels
WHERE NOT ST_IsValid(boundary);

-- Attempt to fix invalid geometries
UPDATE parcels
SET boundary = ST_MakeValid(boundary)
WHERE NOT ST_IsValid(boundary);

SRID Consistency

-- Verify SRID consistency
SELECT DISTINCT ST_SRID(geom) FROM spatial_table;

-- Enforce SRID with constraint
ALTER TABLE locations ADD CONSTRAINT enforce_srid
    CHECK (ST_SRID(location) = 4326);

Coordinate Range Validation

-- Ensure coordinates are within valid WGS84 bounds
ALTER TABLE global_locations ADD CONSTRAINT valid_coords CHECK (
    ST_X(location::GEOMETRY) BETWEEN -180 AND 180 AND
    ST_Y(location::GEOMETRY) BETWEEN -90 AND 90
);

Do Not Use

• PostgreSQL built-in types (POINT, LINE, POLYGON, CIRCLE) - use PostGIS types instead
• SRID 0 (undefined) - always specify the correct SRID
• ST_Distance for filtering - use ST_DWithin for index-supported distance queries
• Mixed SRIDs in operations - always transform to common SRID first
• GEOGRAPHY for complex analysis - use GEOMETRY with appropriate projection
• Over-precise coordinates - GPS accuracy is ~3-5m, 6 decimal places (0.1m) is sufficient

Common Pitfalls

1. Longitude/Latitude order: PostGIS uses (longitude, latitude) = (X, Y), not (lat, lon)
2. GEOGRAPHY distance units: Always in meters, regardless of display
3. Index not used: Run EXPLAIN ANALYZE to verify spatial index usage
4. Transform performance: Cache transformed geometries for repeated queries
5. Large geometries: Consider ST_Subdivide for very complex polygons
6. SQL injection / unsafe dynamic SQL: Don't concatenate untrusted input into SQL. Parameterize values; for dynamic identifiers use safe quoting (quote_ident, format('%I', ...)) or strict allowlists.