Check Reports

Parsing Patterns

Timing Reports (*timing*.rpt)

• Find the line containing slack (MET) or slack (VIOLATED) and extract the numeric slack value.
• Extract Startpoint:, Endpoint:, Path Group:, Path Type: (max or min).
• CRITICAL: Negative slack = timing violation. Report it prominently.

QoR Reports (*qor*.rpt)

For each Timing Path Group block, extract:

• Critical Path Slack: value
• Total Negative Slack: value (should be 0.00)
• No. of Violating Paths: count (should be 0)
• Worst Hold Violation: value
• No. of Hold Violations: count

From the Cell Count section:

• Leaf Cell Count: total standard cells
• Sequential Cell Count: flip-flops + ICGs

From the Area section:

• Cell Area (netlist): standard cell area

Area Reports (*area*.rpt / report_design -all)

Extract:

• Core Area is : value (um^2)
• Chip Area is : value (um^2)
• From CELL INSTANCE INFORMATION table: Standard cells count and area
• Calculate utilization: Standard cell area / Core area * 100%
• Report utilization prominently.

DRC Reports (*drc*.rpt / check_routes output)

Extract:

• TOTAL VIOLATIONS = count (must be 0)
• Total number of open nets = count (must be 0)
• Total number of antenna violations = count
• TOTAL SOFT VIOLATIONS = count

LVS Reports (*lvs*.rpt / check_lvs output)

Extract:

• Total number of short violations is count (CRITICAL -- must be 0)
• Total number of open nets is count (must be 0)
• Total number of floating route violations is count (must be 0)

Power Reports (*power*.rpt)

Extract:

• Total Dynamic Power value and unit
• Cell Leakage Power value and unit
• From power group table: clock_network percentage (watch for high clock power)

PrimeTime Violation Reports

For *_allvios.rpt:

• Count lines containing (VIOLATED) -- total violations
• Categorize by section: max_transition, max_capacitance, setup, hold

For *_fix_all_vios.report:

• Same parsing -- these are post-ECO residual violations

StarRC Verification

• Check all 4 SPEF files exist and have non-zero size:
  • starrc/spef/cmax_25c.spef, cmax_125c.spef, cmin_25c.spef, cmin_125c.spef
• Grep for Error in starrc/temp/stardir_*/summary/*.sum files

Output Format

Present results as a clear table:

=== FC [Stage] Report Summary ===

| Metric                  | Value        | Status   |
|-------------------------|--------------|----------|
| Setup Slack (max)       | XX.XX ns     | MET/FAIL |
| Hold Slack (min)        | XX.XX ns     | MET/FAIL |
| Total Negative Slack    | 0.00         | CLEAN    |
| Violating Paths         | 0            | CLEAN    |
| DRC Violations          | 0            | CLEAN    |
| LVS Shorts              | 0            | CLEAN    |
| LVS Opens               | 0            | CLEAN    |
| Antenna Violations      | 0            | CLEAN    |
| Floating Routes         | 0            | CLEAN    |
| Cell Area               | XXXX.XX um^2 |          |
| Core Area               | XXXX.XX um^2 |          |
| Area Utilization        | XX.X%        |          |
| Total Dynamic Power     | XX.XX uW     |          |
| Cell Leakage Power      | XX.XX uW     |          |

Use "FAIL" in red-style emphasis (FAIL) for any violations. Use "CLEAN" or "MET" for passing checks.

Important Rules

• Never delete or modify report files.
• If a report file is missing, note it clearly (do not fail silently).
• Always calculate and present area utilization percentage.
• For timing, always report BOTH setup (delay_type max) and hold (delay_type min) when available.
• Flag any Warning: lines in reports that indicate potential issues (e.g., power table extrapolation).