Measuring Tumor Response

1. What response criteria are required? (Default: RECIST 1.1 — specify if iRECIST, mRECIST, Choi, or RANO)
2. Is this a baseline or follow-up assessment? (Default: Identify timepoint)
3. What is the tumor type and treatment protocol? (Default: Obtain from oncology notes)
4. Are prior measurement studies available with target-lesion table? (Default: Required for follow-up)
5. What imaging modality and protocol were used? (Default: CT with IV contrast, portal venous phase)
6. Is the patient on immunotherapy (requiring iRECIST)? (Default: No — verify with oncology)
7. Are there known non-measurable sites of disease (bone, leptomeningeal, effusion)? (Default: Document all disease sites)

Documents to Request

• Current imaging study (CT, MRI) with identical protocol to baseline
• Baseline imaging study with original target-lesion measurements
• Prior measurement tables from all timepoints
• Oncology treatment protocol specifying response criteria
• Clinical trial protocol (if applicable) with measurement instructions
• List of known disease sites from staging workup (PET/CT, bone scan)

Step 1: Target Lesion Selection (Baseline Only)

At baseline, select target lesions per RECIST 1.1 rules:

Selection Criteria

Lesion Selection Priority

1. Largest lesions that are clearly measurable
2. Lesions representative of all involved organs
3. Lesions amenable to reproducible measurement (avoid lesions near heart/diaphragm motion)
4. Avoid previously irradiated lesions unless unequivocal progression post-radiation

Non-Target Lesions

All other sites of disease not selected as targets. Document as present and track qualitatively:

• Bone lesions (lytic only; blastic are non-measurable)
• Leptomeningeal disease
• Pleural/pericardial effusions
• Lymphangitic carcinomatosis
• Lesions <10 mm or lymph nodes 10–14 mm short axis

Step 2: Measurement Technique

Measurement Rules

• Use electronic calipers on axial images (or coronal/sagittal if specified at baseline)
• Measure to the nearest millimeter
• Use the same slice thickness and reconstruction at each timepoint
• If a lesion splits into fragments, sum the longest diameters of all fragments
• If lesions merge, measure the combined mass as a single lesion
• "Too small to measure" = assign 5 mm value per RECIST convention

Step 3: Calculate Response Category

Sum of Longest Diameters (SLD)

Calculate the SLD of all target lesions at each timepoint:

SLD = Target₁ + Target₂ + Target₃ + ... + Target₅

For lymph nodes, use short-axis diameter in the SLD calculation.

RECIST 1.1 Response Categories

Key Calculation Points

• Nadir: The smallest SLD recorded at any timepoint (not necessarily baseline)
• Baseline: The reference for PR calculation
• 5 mm absolute increase rule: Prevents small absolute changes in small lesions from triggering PD
• New lesion: Any unequivocal new lesion = PD regardless of SLD change

Step 4: iRECIST Modifications for Immunotherapy

Pseudoprogression recognition:

• New or enlarging lesions on first post-immunotherapy scan
• If clinical status stable, rescan in 4–8 weeks before declaring PD
• iRECIST allows continued treatment through first unconfirmed progression

Step 5: Structured Measurement Report

Measurement Table Format

Non-Target Assessment Table

Overall Response: Stable Disease (SLD decrease of 18.2% does not meet 30% threshold for PR)

Checkpoint B: Post-Draft Alignment (Mandatory)

1. Are the correct response criteria applied (RECIST 1.1 vs. iRECIST vs. other)?
2. Were target lesions measured using the same technique and axis as baseline?
3. Is the SLD calculated correctly with nadir reference for PD assessment?
4. Are non-target lesions assessed qualitatively?
5. Are new lesions documented and factored into the overall response?

Quality Audit

• Response criteria version is stated (RECIST 1.1, iRECIST)
• Target lesion count does not exceed 5 total or 2 per organ
• All target lesions meet minimum size criteria at baseline
• Measurements use the correct axis (longest diameter for masses, short axis for nodes)
• Same imaging modality, protocol, and phase used at each timepoint
• SLD is calculated and recorded at each timepoint
• Percentage change calculated from both baseline (for PR) and nadir (for PD)
• The 5 mm absolute-increase rule is applied for PD determination
• Non-target lesions are assessed and documented
• New lesions are explicitly addressed (present/absent)
• Measurement table includes all timepoints for trending
• Overall response category is explicitly stated
• "Too small to measure" lesions are assigned 5 mm per RECIST convention
• For iRECIST, unconfirmed PD triggers confirmatory imaging at 4–8 weeks

Guidelines

1. Never change target lesions after baseline — measure the same lesions at every timepoint, even if they become difficult to measure.
2. Use the nadir (not baseline) as the reference for progressive disease determination.
3. A single new lesion = progressive disease, regardless of target-lesion response.
4. For immunotherapy patients, always confirm progression with repeat imaging before declaring iCPD.
5. Lymph nodes are measured by short axis; a node must decrease to <10 mm short axis to qualify as CR.
6. If a target lesion becomes "too small to measure," assign 5 mm — do not use 0 mm unless the lesion is truly undetectable.
7. Report the overall response category explicitly in the impression — do not leave the oncologist to calculate it from raw measurements.
8. Include measurement uncertainty: if two timepoints are close to a category boundary, note the clinical significance.