Axiom Swiftui Nav Diag

Navigation state lost when app backgrounds

Critical distinction NavigationStack behavior is deterministic. If it's not working, you're modifying state incorrectly, have view identity issues, or navigationDestination is misplaced.

Mandatory First Steps

ALWAYS run these checks FIRST (before changing code):

// 1. Add NavigationPath logging
NavigationStack(path: $path) {
    RootView()
        .onChange(of: path.count) { oldCount, newCount in
            print("📍 Path changed: \(oldCount) → \(newCount)")
            // If this never fires, link isn't modifying path
            // If it fires unexpectedly, something else modifies path
        }
}

// 2. Check navigationDestination is visible
// Put temporary print in destination closure
.navigationDestination(for: Recipe.self) { recipe in
    let _ = print("🔗 Destination for Recipe: \(recipe.name)")
    RecipeDetail(recipe: recipe)
}
// If this never prints, destination isn't being evaluated

// 3. Check NavigationLink is inside NavigationStack
// Visual inspection: Trace from NavigationLink up view hierarchy
// Must hit NavigationStack, not another container first

// 4. Check path state location
// @State must be in stable view (not recreated each render)
// Must be @State, @StateObject, or @Observable — not local variable

// 5. Test basic case in isolation
// Create minimal reproduction
NavigationStack {
    NavigationLink("Test", value: "test")
        .navigationDestination(for: String.self) { str in
            Text("Pushed: \(str)")
        }
}
// If this works, problem is in your specific setup

What this tells you

MANDATORY INTERPRETATION

Before changing ANY code, identify ONE of these:

1. If link tap does nothing AND no onChange → Link outside NavigationStack (check hierarchy)
2. If onChange fires but nothing pushes → navigationDestination not in scope (check placement)
3. If pushes then immediately pops → View identity change or path reset (check @State location)
4. If deep link fails → Timing or MainActor issue (check thread)
5. If crash → Force unwrap on path decode or missing type registration

If diagnostics are contradictory or unclear

• STOP. Do NOT proceed to patterns yet
• Add print statements at every path modification point
• Create minimal reproduction case
• Test with String values first (simplest case)

Decision Tree

Use this to reach the correct diagnostic pattern in 2 minutes:

Navigation problem?
├─ Navigation tap does nothing?
│  ├─ NavigationLink inside NavigationStack?
│  │  ├─ No → Pattern 1a (Link outside Stack)
│  │  └─ Yes → Check navigationDestination
│  │
│  ├─ navigationDestination registered?
│  │  ├─ Inside lazy container? → Pattern 1b (Lazy Loading)
│  │  ├─ Type mismatch? → Pattern 1c (Type Registration)
│  │  └─ Blocked by sheet/popover? → Pattern 1d (Modal Blocking)
│  │
│  └─ Using view-based link?
│     └─ → Pattern 1e (Deprecated API)
│
├─ Unexpected pop back?
│  ├─ Immediate pop after push?
│  │  ├─ View body recreating path? → Pattern 2a (Path Recreation)
│  │  ├─ @State in wrong view? → Pattern 2a (State Location)
│  │  └─ ForEach id changing? → Pattern 2c (Identity Change)
│  │
│  ├─ Pop when shouldn't?
│  │  ├─ External code calling removeLast? → Pattern 2b (Unexpected Modification)
│  │  ├─ Task cancelled? → Pattern 2b (Async Cancellation)
│  │  └─ MainActor issue? → Pattern 2d (Threading)
│  │
│  └─ Back button behavior wrong?
│     └─ → Pattern 2e (Stack Corruption)
│
├─ Deep link not working?
│  ├─ URL not received?
│  │  ├─ onOpenURL not called? → Check URL scheme in Info.plist
│  │  └─ Universal Links issue? → Check apple-app-site-association
│  │
│  ├─ URL received, path not updated?
│  │  ├─ path.append not on MainActor? → Pattern 3a (Threading)
│  │  ├─ Timing issue (app not ready)? → Pattern 3b (Initialization)
│  │  └─ NavigationStack not created yet? → Pattern 3b (Lifecycle)
│  │
│  └─ Path updated, wrong screen shown?
│     ├─ Wrong path order? → Pattern 3c (Path Construction)
│     ├─ Wrong type appended? → Pattern 3c (Type Mismatch)
│     └─ Item not found? → Pattern 3d (Data Resolution)
│
├─ State lost?
│  ├─ Lost on tab switch?
│  │  ├─ Shared NavigationStack? → Pattern 4a (Shared State)
│  │  └─ Tab recreation? → Pattern 4a (Tab Identity)
│  │
│  ├─ Lost on background/foreground?
│  │  ├─ No SceneStorage? → Pattern 4b (No Persistence)
│  │  └─ Decode failure? → Pattern 4c (Decode Error)
│  │
│  └─ Lost on rotation/size change?
│     └─ → Pattern 4d (Layout Recreation)
│
└─ Crash?
   ├─ EXC_BAD_ACCESS in navigation code?
   │  └─ → Pattern 5a (Memory Issue)
   │
   ├─ Fatal error: type not registered?
   │  └─ → Pattern 5b (Missing Destination)
   │
   └─ Decode failure on restore?
      └─ → Pattern 5c (Restoration Crash)

Pattern Selection Rules (MANDATORY)

Before proceeding to a pattern:

1. Navigation tap does nothing → Add onChange logging FIRST, then Pattern 1
2. Unexpected pop → Find WHAT is modifying path (logging), then Pattern 2
3. Deep link fails → Verify URL received (print in onOpenURL), then Pattern 3
4. State lost → Identify WHEN lost (tab switch vs background), then Pattern 4
5. Crash → Get full stack trace, then Pattern 5

Apply ONE pattern at a time

• Implement the fix from one pattern
• Test thoroughly
• Only if issue persists, try next pattern
• DO NOT apply multiple patterns simultaneously (can't isolate cause)

FORBIDDEN

• Guessing at solutions without diagnostics
• Changing multiple things at once
• Wrapping with UINavigationController "because SwiftUI is broken"
• Adding delays/DispatchQueue.main.async without understanding why
• Switching to view-based NavigationLink "to avoid path issues"

Diagnostic Patterns

Pattern 1a: NavigationLink Outside NavigationStack

Time cost 5-10 minutes

Symptom

• Tapping NavigationLink does nothing
• No navigation occurs, no errors
• onChange(of: path) never fires

Diagnosis

// Check view hierarchy — NavigationLink must be INSIDE NavigationStack

// ❌ WRONG — Link outside stack
struct ContentView: View {
    var body: some View {
        VStack {
            NavigationLink("Go", value: "test")  // Outside stack!
            NavigationStack {
                Text("Root")
            }
        }
    }
}

// Check: Add background color to NavigationStack
NavigationStack {
    Color.red  // If link is on red, it's inside
}

Fix

// ✅ CORRECT — Link inside stack
struct ContentView: View {
    var body: some View {
        NavigationStack {
            VStack {
                NavigationLink("Go", value: "test")  // Inside stack
                Text("Root")
            }
            .navigationDestination(for: String.self) { str in
                Text("Pushed: \(str)")
            }
        }
    }
}

Verification

• Tap link, navigation occurs
• onChange(of: path) fires when tapped

Pattern 1b: navigationDestination in Lazy Container

Time cost 10-15 minutes

Symptom

• NavigationLink tap does nothing OR works intermittently
• onChange fires (path updated) but view doesn't push
• Console may show: "A navigationDestination for [Type] was not found"

Diagnosis

// ❌ WRONG — Destination inside lazy container (may not be loaded)
ScrollView {
    LazyVStack {
        ForEach(items) { item in
            NavigationLink(item.name, value: item)
                .navigationDestination(for: Item.self) { item in
                    ItemDetail(item: item)  // May not be evaluated!
                }
        }
    }
}

Fix

// ✅ CORRECT — Destination outside lazy container
ScrollView {
    LazyVStack {
        ForEach(items) { item in
            NavigationLink(item.name, value: item)
        }
    }
}
.navigationDestination(for: Item.self) { item in
    ItemDetail(item: item)  // Always available
}

Verification

• Add print in destination closure — should always print on navigation
• Works regardless of scroll position

Pattern 1c: Type Registration Mismatch

Time cost 10 minutes

Symptom

• Navigation tap does nothing
• No matching navigationDestination for the value type
• May work for some links, not others

Diagnosis

// Check: Value type must EXACTLY match destination type

// Link uses Recipe
NavigationLink(recipe.name, value: recipe)  // value is Recipe

// Destination registered for... Recipe.ID?
.navigationDestination(for: Recipe.ID.self) { id in  // ❌ Wrong type!
    RecipeDetail(id: id)
}

Fix

// Match types exactly
NavigationLink(recipe.name, value: recipe)  // Recipe

.navigationDestination(for: Recipe.self) { recipe in  // ✅ Recipe
    RecipeDetail(recipe: recipe)
}

// OR change link to use ID
NavigationLink(recipe.name, value: recipe.id)  // Recipe.ID

.navigationDestination(for: Recipe.ID.self) { id in  // ✅ Recipe.ID
    RecipeDetail(id: id)
}

Verification

• Print type in destination: print(type(of: value))
• Types must match exactly (no inheritance)

Pattern 2a: NavigationPath Recreated Every Render

Time cost 15-20 minutes

Symptom

• Navigation pushes then immediately pops back
• Appears to "flash" the destination view
• Works once, then fails, or fails immediately

Diagnosis

// ❌ WRONG — Path created in view body (reset every render)
struct ContentView: View {
    var body: some View {
        let path = NavigationPath()  // Recreated every time!
        NavigationStack(path: .constant(path)) {
            // ...
        }
    }
}

// ❌ WRONG — @State in child view that gets recreated
struct ParentView: View {
    @State var showChild = true
    var body: some View {
        if showChild {
            ChildView()  // Recreated when showChild toggles
        }
    }
}

struct ChildView: View {
    @State var path = NavigationPath()  // Lost when ChildView recreated
    // ...
}

Fix

// ✅ CORRECT — @State at stable level
struct ContentView: View {
    @State private var path = NavigationPath()  // Persists across renders

    var body: some View {
        NavigationStack(path: $path) {
            RootView()
        }
    }
}

// ✅ CORRECT — @StateObject for ObservableObject
struct ContentView: View {
    @StateObject private var navModel = NavigationModel()

    var body: some View {
        NavigationStack(path: $navModel.path) {
            RootView()
        }
    }
}

Verification

• Add onChange logging — path should not reset unexpectedly
• Navigate, wait, path.count stays stable

Pattern 2d: Path Modified Off MainActor

Time cost 10-15 minutes

Symptom

• Navigation works sometimes, fails others
• Swift 6 warnings about MainActor isolation
• Unexpected pops or state corruption

Diagnosis

// ❌ WRONG — Modifying path from background task
func loadAndNavigate() async {
    let recipe = await fetchRecipe()
    path.append(recipe)  // ⚠️ Not on MainActor!
}

// Check: Search for path.append, path.removeLast outside @MainActor context

Fix

// ✅ CORRECT — Ensure MainActor
@MainActor
func loadAndNavigate() async {
    let recipe = await fetchRecipe()
    path.append(recipe)  // ✅ MainActor isolated
}

// OR explicitly dispatch
func loadAndNavigate() async {
    let recipe = await fetchRecipe()
    await MainActor.run {
        path.append(recipe)
    }
}

// ✅ BEST — Use @Observable with @MainActor
@Observable
@MainActor
class Router {
    var path = NavigationPath()

    func navigate(to value: any Hashable) {
        path.append(value)
    }
}

Verification

• No Swift 6 concurrency warnings
• Navigation consistent regardless of timing

Pattern 3a: Deep Link Threading Issue

Time cost 15-20 minutes

Symptom

• Deep link URL received (onOpenURL fires)
• path.append called but navigation doesn't happen
• Works when app is in foreground, fails from cold start

Diagnosis

// ❌ WRONG — May be called before NavigationStack exists
.onOpenURL { url in
    handleDeepLink(url)  // NavigationStack may not be rendered yet
}

func handleDeepLink(_ url: URL) {
    path.append(parsedValue)  // Modifies path that doesn't exist yet
}

Fix

// ✅ CORRECT — Defer deep link handling
@State private var pendingDeepLink: URL?
@State private var isReady = false

var body: some View {
    NavigationStack(path: $path) {
        RootView()
            .onAppear {
                isReady = true
                if let url = pendingDeepLink {
                    handleDeepLink(url)
                    pendingDeepLink = nil
                }
            }
    }
    .onOpenURL { url in
        if isReady {
            handleDeepLink(url)
        } else {
            pendingDeepLink = url  // Queue for later
        }
    }
}

Verification

• Test deep link from cold start (app killed)
• Test deep link when app in background
• Test deep link when app in foreground

Pattern 3c: Deep Link Path Construction Order

Time cost 10-15 minutes

Symptom

• Deep link navigates but to wrong screen
• Shows intermediate screen instead of final destination
• Path appears correct but wrong view displayed

Diagnosis

// ❌ WRONG — Wrong order (child before parent)
// URL: myapp://category/desserts/recipe/apple-pie
func handleDeepLink(_ url: URL) {
    path.append(recipe)    // Recipe pushed first
    path.append(category)  // Category pushed second — WRONG ORDER
}
// User sees Category screen, not Recipe screen

Fix

// ✅ CORRECT — Parent before child
func handleDeepLink(_ url: URL) {
    path.removeLast(path.count)  // Clear existing

    // Build hierarchy: parent → child
    path.append(category)  // First: Category
    path.append(recipe)    // Second: Recipe (shows this screen)
}

// For complex paths, build array first
var newPath: [any Hashable] = []
// Parse URL segments...
newPath.append(category)
newPath.append(subcategory)
newPath.append(item)

// Then apply
path = NavigationPath(newPath)

Verification

• Print path after construction
• Final item in path should be the destination screen

Pattern 4a: Shared NavigationStack Across Tabs

Time cost 15-20 minutes

Symptom

• Navigate in Tab A, switch to Tab B
• Return to Tab A — navigation state lost (back at root)
• Or: Navigation from Tab A appears in Tab B

Diagnosis

// ❌ WRONG — Single NavigationStack wrapping TabView
NavigationStack(path: $path) {
    TabView {
        Tab("Home") { HomeView() }
        Tab("Settings") { SettingsView() }
    }
}
// All tabs share same navigation — state mixed/lost

// ❌ WRONG — Same @State used across tabs
@State var path = NavigationPath()  // Shared
TabView {
    Tab("Home") {
        NavigationStack(path: $path) { ... }  // Uses shared path
    }
    Tab("Settings") {
        NavigationStack(path: $path) { ... }  // Same path!
    }
}

Fix

// ✅ CORRECT — Each tab has own NavigationStack
TabView {
    Tab("Home", systemImage: "house") {
        NavigationStack {  // Own stack
            HomeView()
                .navigationDestination(for: HomeItem.self) { ... }
        }
    }
    Tab("Settings", systemImage: "gear") {
        NavigationStack {  // Own stack
            SettingsView()
                .navigationDestination(for: SettingItem.self) { ... }
        }
    }
}

// For per-tab path tracking:
struct HomeTab: View {
    @State private var path = NavigationPath()  // Tab-specific

    var body: some View {
        NavigationStack(path: $path) {
            HomeView()
        }
    }
}

Verification

• Navigate in Tab A, switch tabs, return — state preserved
• Each tab maintains independent navigation history

Pattern 4b: No State Persistence on Background

Time cost 15-20 minutes

Symptom

• Navigate to screen, background app
• Kill app or wait for system to terminate
• Relaunch — navigation state lost (back at root)

Diagnosis

// ❌ WRONG — No persistence mechanism
@State private var path = NavigationPath()
// Path lost when app terminates

Fix

// ✅ CORRECT — Use SceneStorage + Codable
struct ContentView: View {
    @StateObject private var navModel = NavigationModel()
    @SceneStorage("navigation") private var savedData: Data?

    var body: some View {
        NavigationStack(path: $navModel.path) {
            RootView()
        }
        .task {
            // Restore on appear
            if let data = savedData {
                navModel.restore(from: data)
            }
            // Save on changes
            for await _ in navModel.objectWillChange.values {
                savedData = navModel.encoded()
            }
        }
    }
}

@MainActor
class NavigationModel: ObservableObject {
    @Published var path = NavigationPath()

    func encoded() -> Data? {
        guard let codable = path.codable else { return nil }
        return try? JSONEncoder().encode(codable)
    }

    func restore(from data: Data) {
        guard let codable = try? JSONDecoder().decode(
            NavigationPath.CodableRepresentation.self,
            from: data
        ) else { return }
        path = NavigationPath(codable)
    }
}

Verification

• Navigate deep, background app
• Kill app via Xcode
• Relaunch — state restored

Pattern 5b: Missing navigationDestination Registration

Time cost 10-15 minutes

Symptom

• Crash: "No destination found for [Type]"
• Or navigation silently fails
• Happens when pushing certain types

Diagnosis

// Every type pushed on path needs a destination

// You push Recipe
path.append(recipe)  // Recipe type

// But only registered Category
.navigationDestination(for: Category.self) { ... }
// No destination for Recipe!

Fix

// Register ALL types you might push
NavigationStack(path: $path) {
    RootView()
        .navigationDestination(for: Category.self) { category in
            CategoryView(category: category)
        }
        .navigationDestination(for: Recipe.self) { recipe in
            RecipeDetail(recipe: recipe)
        }
        .navigationDestination(for: Chef.self) { chef in
            ChefProfile(chef: chef)
        }
}

// Or use enum route type for single registration
enum AppRoute: Hashable {
    case category(Category)
    case recipe(Recipe)
    case chef(Chef)
}

.navigationDestination(for: AppRoute.self) { route in
    switch route {
    case .category(let cat): CategoryView(category: cat)
    case .recipe(let recipe): RecipeDetail(recipe: recipe)
    case .chef(let chef): ChefProfile(chef: chef)
    }
}

Verification

• List all types you push on path
• Verify each has matching navigationDestination

Pattern 5c: State Restoration Decode Crash

Time cost 15-20 minutes

Symptom

• Crash on app launch
• Stack trace shows JSON decode failure
• Happens after app update or data model change

Diagnosis

// ❌ WRONG — Force unwrap decode
func restore(from data: Data) {
    let codable = try! JSONDecoder().decode(  // 💥 Crashes!
        NavigationPath.CodableRepresentation.self,
        from: data
    )
    path = NavigationPath(codable)
}

// Crash reasons:
// - Saved path contains type that no longer exists
// - Codable encoding changed between versions
// - Saved item was deleted

Fix

// ✅ CORRECT — Graceful decode with fallback
func restore(from data: Data) {
    do {
        let codable = try JSONDecoder().decode(
            NavigationPath.CodableRepresentation.self,
            from: data
        )
        path = NavigationPath(codable)
    } catch {
        print("Navigation restore failed: \(error)")
        path = NavigationPath()  // Start fresh
        // Optionally clear bad saved data
    }
}

// ✅ BETTER — Store IDs, resolve to objects
class NavigationModel: ObservableObject, Codable {
    var selectedIds: [String] = []  // Store IDs

    func resolvedPath(dataModel: DataModel) -> NavigationPath {
        var path = NavigationPath()
        for id in selectedIds {
            if let item = dataModel.item(withId: id) {
                path.append(item)
            }
            // Missing items silently skipped
        }
        return path
    }
}

Verification

• Delete saved state, launch app — no crash
• Simulate bad data — graceful fallback
• Change data model, launch — handles mismatch

Production Crisis Scenario

Context: Navigation Randomly Breaks After iOS Update

Situation

• iOS 18 ships on Tuesday
• By Wednesday, support tickets surge: "navigation broken"
• 20% of users report tapping links does nothing
• Some users report navigation "resets randomly"
• CTO asks: "What's the ETA on a fix?"

Pressure signals

• 🚨 Production issue 20% of users affected
• ⏰ Time pressure "Users are leaving bad reviews"
• 👔 Executive visibility CTO personally tracking
• 📱 Platform change New iOS version

Rationalization traps (DO NOT fall into these)

1. "It's an iOS 18 bug, wait for Apple to fix"

   • If 80% of users work fine, it's not iOS
   • Apple's apps use same NavigationStack
   • Your code has an edge case exposed by iOS changes

2. "Let's wrap UINavigationController"

   • 2-3 week rewrite
   • Lose SwiftUI state management
   • UIKit has its own iOS 18 changes
   • Doesn't address root cause

3. "Add retry logic for navigation"

   • Navigation is synchronous — retries don't help
   • Masks symptom, doesn't fix cause
   • Makes debugging harder

4. "Roll back to pre-iOS 18 version"

   • Can't control user iOS version
   • App Store version must support iOS 18
   • Doesn't fix the issue

MANDATORY Diagnostic Protocol

You have 2 hours to provide CTO with:

1. Root cause
2. Fix timeline
3. Workaround for affected users

Step 1: Identify Pattern (30 minutes)

// Release build with diagnostic logging
#if DEBUG || DIAGNOSTIC
NavigationStack(path: $path) {
    // ...
}
.onChange(of: path.count) { old, new in
    Analytics.log("nav_path_change", ["old": old, "new": new])
}
#endif

// Check analytics for:
// - path.count going to 0 unexpectedly → Path recreation
// - path.count increasing but no push → Missing destination
// - No path changes at all → Link not firing

Step 2: Cross-Reference with iOS 18 Changes (15 minutes)

// iOS 18 changes that affect navigation:
// 1. Stricter MainActor enforcement
// 2. Changes to view identity in TabView
// 3. New navigation lifecycle timing

// Most common iOS 18 issue:
// Code that worked by accident now fails

// Check: Any path modifications in async contexts without @MainActor?
Task {
    let result = await fetch()
    path.append(result)  // ⚠️ iOS 18 stricter about this
}

Step 3: Apply Targeted Fix (30 minutes)

// Root cause found: NavigationPath modified from async context
// iOS 17 was lenient, iOS 18 enforces MainActor properly

// ❌ Old code (worked on iOS 17, breaks on iOS 18)
func loadAndNavigate() async {
    let recipe = await fetchRecipe()
    path.append(recipe)  // Race condition
}

// ✅ Fix: Explicit MainActor isolation
@MainActor
func loadAndNavigate() async {
    let recipe = await fetchRecipe()
    path.append(recipe)  // ✅ Safe
}

// OR: Annotate entire class
@Observable
@MainActor
class Router {
    var path = NavigationPath()

    func navigate(to value: any Hashable) {
        path.append(value)
    }
}

Step 4: Validate and Deploy (45 minutes)

// 1. Test on iOS 17 device — still works
// 2. Test on iOS 18 device — now works
// 3. Test all navigation paths
// 4. Submit expedited review

// Expedited review justification:
// "Critical bug fix for iOS 18 compatibility affecting 20% of users"

Professional Communication Templates

To CTO (45 minutes after starting)

Root cause identified: Navigation code wasn't properly isolated
to the main thread. iOS 18 enforces this more strictly than iOS 17.

Fix: Add @MainActor annotation to navigation code.
Already tested on iOS 17 (no regression) and iOS 18 (fixes issue).

Timeline:
- Fix ready: Now
- QA validation: 1 hour
- App Store submission: Today
- Available to users: 24-48 hours (expedited review)

Workaround for affected users: Force quit and relaunch app
often clears the issue temporarily.

To Engineering Team

iOS 18 Navigation Fix

Root cause: NavigationPath modifications in async contexts
without @MainActor isolation. iOS 17 was permissive, iOS 18 enforces.

Fix applied:
- Added @MainActor to Router class
- Updated all path.append/removeLast calls to be MainActor-isolated
- Added Swift 6 concurrency checking to catch future issues

Files changed: Router.swift, ContentView.swift, DeepLinkHandler.swift

Testing needed:
- All navigation flows
- Deep links from cold start
- Tab switching with navigation state
- Background/foreground with navigation state

Quick Reference Table

Common Mistakes

Mistake 1: Putting navigationDestination Inside ForEach

Problem Destination not loaded when needed (lazy evaluation).

Why it fails LazyVStack/ForEach don't evaluate all children. Destination may not exist when link is tapped.

Fix

// Move destination OUTSIDE lazy container
List {
    ForEach(items) { item in
        NavigationLink(item.name, value: item)
    }
}
.navigationDestination(for: Item.self) { item in
    ItemDetail(item: item)
}

Mistake 2: Using NavigationView on iOS 16+

Problem NavigationView deprecated, different behavior across versions.

Why it fails No NavigationPath support, can't programmatically navigate or deep link reliably.

Fix

• Replace NavigationView with NavigationStack or NavigationSplitView
• Use value-based NavigationLink(title, value:) instead of view-based

Mistake 3: Creating NavigationPath in computed property

Problem Path reset every access.

Why it fails var body is called repeatedly. Creating path there means it's reset constantly.

Fix

// Use @State, not computed
@State private var path = NavigationPath()  // ✅ Persists

// NOT
var path: NavigationPath { NavigationPath() }  // ❌ Reset every time

Mistake 4: Not Handling Decode Errors in Restoration

Problem Crash when saved navigation data is invalid.

Why it fails Data model changes, items deleted, encoding format changes between app versions.

Fix

• Always use try? or do/catch for decode
• Provide fallback (empty path)
• Consider storing IDs and resolving to objects

Mistake 5: Assuming Deep Links Work Immediately

Problem Deep link on cold start fails.

Why it fails onOpenURL may fire before NavigationStack is rendered.

Fix

• Queue deep link URL
• Process after onAppear of NavigationStack
• Use isReady flag pattern

Cross-References

For Preventive Patterns

swiftui-nav skill — Discipline-enforcing anti-patterns:

• Red Flags: NavigationView, view-based links, path in body
• Pattern 1a-7: Correct implementation patterns
• Pressure Scenarios: How to handle architecture pressure

For API Reference

swiftui-nav-ref skill — Complete API documentation:

• NavigationStack, NavigationSplitView, NavigationPath full API
• All WWDC code examples with timestamps
• Router/Coordinator patterns with testing
• iOS 26+ features (Liquid Glass, bottom search)

For Related Issues

swift-concurrency skill — If MainActor issues:

• Pattern 3: @MainActor isolation patterns
• Async/await with UI updates
• Task cancellation handling

Last Updated 2025-12-05 Status Production-ready diagnostics Tested Diagnostic patterns validated against common navigation issues