Motive Marker V3d Guideline | Skills Pool
Motive Marker V3d Guideline Interpret OptiTrack Motive marker sets (Conventional 39 + user medial markers) and translate them into Visual3D-style biomechanical workflows; includes this project's user-data conventions (file naming, events, coordinates).
Rukkha1024 0 Sterne 15.03.2026 Beruf Kategorien Data Engineering When to use
Use this skill when you need to:
Understand what markers exist in an OptiTrack Motive Conventional (39) full-body skeleton export (and this project’s extra medial markers ).
Decide what Visual3D (V3D) -style biomechanical analyses are feasible without force plates .
Set up a repeatable analysis recipe for this project’s perturbation trials (platform onset / step onset).
Provide the marker/coordinate/event assumptions that the computation skill v3d-com-xcom-bos-mos
What you should check first (fast triage)
Data type & preprocessing
Marker trajectories are labeled and filtered already (Motive labeling + filtering done upstream).
Units are meters (verify POINT:UNITS in C3D).
Marker set availability
Schnellinstallation
Motive Marker V3d Guideline npx skillvault add Rukkha1024/rukkha1024-muscle-synergy-analysis-agents-skills-motive-marker-v3d-guideline-skill-md
Sterne 0
Aktualisiert 15.03.2026
Beruf
Confirm that the trial contains pelvis (ASIS/PSIS), trunk, head, and lower-limb markers.
Confirm whether medial markers are present (this project uses them; see assets/optitrack_marker_context.xml).
Force plate constraint
If only one force plate exists (or force data are unusable), you must use marker/kinematics-based BoS and contact logic (no COP-based BoS).
Events
Platform onset/offset and step onset come from an external event table (see “User dataset conventions” below).
Canonical intent of Conventional (39)
A full-body marker configuration meant to reconstruct a skeleton and joint centers.
Pelvis markers are the key drivers for downstream segment definitions.
What this project adds This project supplements the standard set with medial counterparts of key joint markers (elbow, knee, ankle). These support:
Joint center estimation as midpoint (lateral, medial)
Better knee/ankle axis definition
See the full context XML:
assets/optitrack_marker_context.xml
Practical mapping notes (common in exported C3D) Depending on the pipeline, the same physical marker set can appear with different label conventions:
OptiTrack docs often use LIAS/RIAS/LIPS/RIPS, etc.
Many biomechanics exports use Plug-in-Gait-like names: LASI/RASI/LPSI/RPSI, LHEE/LTOE, etc.
Many datasets prepend a trial prefix (e.g., 251112_KUO_), meaning the base marker name is after the final underscore.
Action: For computation, always normalize to base marker names (strip common prefixes).
Visual3D-style biomechanical analyses you can do (no force plates)
Model/kinematics-derived signals (typical V3D workflow)
Segment coordinate systems (pelvis, thigh, shank, foot, trunk)
Joint angles (cardan/euler choices must be specified)
Whole-body COM (model-based) and COM velocity
Stability metrics feasible without COP You can still compute dynamic stability metrics using marker-based BoS:
COM : from model/segment definitions (or a validated proxy)XCoM (Hof): COM plus velocity scaled by an inverted-pendulum factorBoS polygon/bounds: from foot landmarks (measured or virtual)MoS : shortest distance from XCoM to BoS boundary (signed) For the actual implementation recipe used in this project, use the computation skill:
User dataset conventions (THIS PROJECT)
File naming C3D trial naming convention:
{date}_{name_initial}_perturb_{velocity}_{trial}.c3d
251112_KUO_perturb_60_001.c3d
Event source Platform onset/offset and step onset are not computed from force plates.
Source file: perturb_inform.xlsm
Sheet: platform
Required columns:
subject, velocity, trialplatform_onset, platform_offsetstep_onset (may be blank for non-step)state often encodes stepping side (e.g., step_L, step_R)
Trial trimming / range assumption In this project, each exported C3D is trimmed to:
[platform_onset - 100 frames, platform_offset + 100 frames] So within the trimmed file, platform onset occurs at ~frame 100 (0-indexing may vary by tool).
Coordinate sanity checks Because coordinate conventions can differ across systems, always verify by inspection:
The vertical axis is the axis where pelvis/head markers are ~1–2 m above foot markers.
The horizontal plane is the other two axes.
Do not hardcode axes unless you have confirmed them for the dataset.
Subject anthropometrics (required for this project) This project’s analysis must use anthropometrics.
If the user did not provide anthropometrics, you must request at minimum:
leg length
foot length
foot width
ankle width
knee width
(Other measures like elbow/wrist width are useful if building a full Plug-in-Gait-like model.)
Example: 김우연 (provided) Raw measurements provided by the user (units as collected):
leg length: 86 (cm)
knee width: 9 (cm)
ankle width: 6.5 (cm)
foot width: 8.5 (cm)
foot length: 240 (mm)
elbow width: 8 (cm)
wrist width: 5.5 (cm)
cm → m: divide by 100
mm → m: divide by 1000
Hand-off to the computation skill When you move from “guideline” to “compute metrics,” provide the following to v3d-com-xcom-bos-mos:
path(s) to C3D trial(s)
path to perturb_inform.xlsm (or event frames)
subject anthropometrics (convertible to meters)
optional: V3D-exported COM file for validation
02
What you should check first (fast triage)