Berufe

Occupational Health and Safety Specialists

15 Skills

KI fragen

15 Skills

Berufe

Occupational Health and Safety Specialists

15 Skills

KI fragen

15 Skills

Stpa Step4 Loss Scenarios

STPA Step 4 - Identify Loss Scenarios by tracing causal pathways back through control loops to understand why UCAs might occur. After completing STPA Step 3. When you need to understand WHY unsafe control actions might happen. When developing recommendations and mitigations.

sandgardenhq115

Machine Learning

Dangerous Goods

Establishes a standardized methodology for the systematic identification and classification of dangerous goods hazard classes through multi-source data integration and quantitative severity assessment.

vivekhaldar10

Computerchemie

Hazmat

Hazardous material classification tool

bytesagain3

Sicherheit

IPL Qualification Assessor

Evaluate whether a safeguard qualifies as an Independent Protection Layer (IPL) per CCPS (2001) criteria. Use this skill when the user asks to assess IPL qualification, evaluate safeguard independence, determine if a control measure can be credited in LOPA, check for common cause failures, assess BPCS independence (Approach A vs B), evaluate human action IPL criteria, or review an IPL register. Also trigger when users provide a list of safeguards and ask which can be credited as IPLs in a LOPA study.

teddychenfeiyang-png1

Sicherheit

Safety Compliance

Audit workplace safety compliance systems for OSHA regulatory gap analysis, inspection readiness assessment, permit-to-work management, lockout/tagout program compliance, confined space entry procedures, and electrical safety evaluation. Use when reviewing EHS platforms, safety management software, permit systems, industrial hygiene tools, or compliance tracking against OSHA 29 CFR 1910/1926, NFPA 70E, and ANSI standards.

tinh21

Datenanalyse

AIOH Compliance Decision Framework

AIOH occupational hygiene exposure compliance decision framework based on the AIOH Compliance Decision Guide. Typically routed to by the request-router skill when occupational hygiene monitoring data is detected, or invoked directly by name (e.g. "run AIOH compliance analysis", "assess this SEG using aioh-compliance"). Use this skill for occupational exposure compliance assessment, AIOH compliance categories, UCL 95% compliance testing, U-parameter group compliance test, MVUE calculation, Land's exact method, exposure data treatment, lognormal distribution fitting, SEG compliance decisions, occupational hygiene statistics, exceedance fraction calculation, when to use UCL vs U-test, method disagreement guidance, or any question about interpreting occupational exposure monitoring data for compliance purposes. Also trigger when reviewing or generating occupational hygiene reports that reference AIOH methodology, workplace exposure standards, or statistical analysis of airborne contaminant data.

teddychenfeiyang-png1

Astronomie & Physik

As2985 Checker

Technical reference for AS 2985:2009 (respirable dust sampling method). Load this skill when rcs-report-generator or another action skill needs to verify or cite specific clauses of the gravimetric determination method for respirable dust. Not intended as a standalone user tool.

teddychenfeiyang-png1

Immobilien & Recht

Workplace Risk Scoring Analysis Complete

Audit workplace risk scoring systems and occupational safety programs -- evaluate job hazard analysis (JHA/JSA) methodology and task-level hazard identification, risk matrix calibration for likelihood and consequence scales, exposure assessment accuracy for chemical, noise, vibration, and heat stress monitoring, PPE adequacy under 29 CFR 1910.132(d) and respirator fit testing per 29 CFR 1910.134, and ergonomic risk factors using REBA, RULA, NIOSH Lifting Equation, and Strain Index. Covers NIOSH hierarchy of controls (elimination, substitution, engineering, administrative, PPE), ALARP risk tolerance criteria, musculoskeletal disorder prevention programs, OSHA PEL and ACGIH TLV compliance, inter-rater reliability for risk assessors, and management of change for safety-critical controls.

tinh21

Finanzen & Investitionen

Risk Management Specialist

Medical device risk management specialist implementing ISO 14971 throughout product lifecycle. Provides risk analysis, risk evaluation, risk control, and post-production information analysis.

LJT-5201

Laborwerkzeuge

Capa Officer

CAPA system management for medical device QMS. Covers root cause analysis, corrective action planning, effectiveness verification, and CAPA metrics. Use for CAPA investigations, 5-Why analysis, fishbone diagrams, root cause determination, corrective action tracking, effectiveness verification, or CAPA program optimization.

panlm1

Debugging

LOPA Sensitivity Analysis

LOPA sensitivity analysis for IPL PFD variations, initiating event frequency ranges, and risk tolerance gap assessment. Use this skill when the user asks for sensitivity analysis of LOPA results, wants to understand how changes in IPL PFDs affect mitigated frequency, needs to evaluate the impact of using screening values vs site-specific data, or wants to assess the margin between mitigated frequency and risk tolerance criteria. Also trigger when users ask "what if" questions about LOPA parameters, request Monte Carlo or parametric analysis of LOPA scenarios, or need to justify that ALARP has been demonstrated.

teddychenfeiyang-png1

Immobilien & Recht

AS 3833:2024 — The Storage and Handling of Mixed Classes of Dangerous Goods, in Packages and Intermediate Bulk Containers — Complete Reference

Technical reference for AS 3833:2024 (Storage and handling of mixed classes of dangerous goods). Use this skill when the user asks about mixed dangerous goods storage, segregation of incompatible dangerous goods classes, retail storage of dangerous goods, transit storage, storage cabinets for dangerous goods, separation distances for mixed stores, or fire protection for dangerous goods stores — or when an action skill needs to verify or cite specific clauses of AS 3833:2024.

teddychenfeiyang-png1

Bioinformatik

Ksb D06 K0019

Swiss Cheese Model Application: Analyzing how multiple system failures align to permit error occurrence...

nexvigilant0

Computerchemie

Ksb D10 K0004

Risk Characterization Framework: Dose-response modeling, exposure assessment, hazard identification, risk characterization integratio...

nexvigilant0

Computerchemie

Ksb D11 K0001

Risk Assessment Methodology: Hazard identification principles, exposure assessment techniques, dose-response analysis, risk chara...

nexvigilant0